Datasheet

APPLICATION SPECIFICATION
REVISION:
ECR/ECN INFORMATION:
TITLE:
2.4/5G WIFI ANTENNA WITH SIDE
SOLDER CABLE
SHEET No.
C
EC No:
171309
15 of 32
DATE:
2018/01/24
DOCUMENT NUMBER:
CREATED / REVISED BY:
CHECKED BY:
APPROVED BY:
AS-2042810100
Benson Liu 2018/01/24
Kang Cheng 2018/01/24
Chris Zhong 2018/01/24
TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC
5.0 ASSEMBLY GUIDELINE
The flex antenna comes with an adhesive 3M9077 for assemble onto the plastic wall of the
system. The surface should be smooth with Ra<1.6um, and need to clean the surface before
sticking this product. The antenna cannot be placed on a metallic surface.
FIGURE 5.1 ASSEMBLY GUIDELINE
During the assembly of the antenna in a device, the cable needs to be positioned away from the
antenna flex to achieve best performance. The cable must be away from the pattern at least 5mm
as shown in figure 5.2. If the cable crosses into the antenna flex, the antenna performance will be
degraded.