MX150L™ Sealed Connector System
MX150L™ Sealed Connector System The pre-assembled, submersible MX150L is a high performance connector system suitable for challenging, rugged and harsh applications. The MX150L sealed connector system is designed to meet the need for a rugged, environmentally sealed connector system supporting both low-level signal applications as well as power applications up to 40.0A, from on-engine automotive and marine applications to off-road construction equipment applications.
MX150L™ Product Overview 14 TO 22 AWG WIRE-TO-WIRE, PANEL MOUNT AND PCB 19417 Male Terminal 14-22 AWG page 4 19419 Plug pages 6, 8 19420 Female Terminal 14-22 AWG page 3 19418 Receptacle pages 5, 7 19427 PCB Header Right Angle without Flange pages 14, 15 19429 Panel Mount Plug Through Hole Flange pages 11, 12 19429 Panel Mount Plug Rear Mount Flange pages 9, 10 19428 PCB Header Vertical Low Profile pages 16, 17 19428 PCB Header Vertical Standard Profile pages 18, 19 19435 Sealed Panel Mount Plug p
5.84mm (.230”) Pitch MX150L™ Terminal FEATURES AND SPECIFICATIONS Features and Benefits ■ Mat seal friendly design features center seam and coined edges ■ Anti-over stress beam geometry feature ■ Low insertion force Reference Information UL File No.: E152602 Designed In: Inches Used With: 19418 Electrical Current: 18.0A Physical Contact: Copper Alloy Plating: Tin or Gold 19420 Female Mechanical Contact Insertion Force: 1.0 lb. max.
.84mm (.230”) Pitch MX150L™ Terminal FEATURES AND SPECIFICATIONS Features and Benefits ■ Mat seal friendly design features center seam and coined Electrical ■ Low insertion force Reference Information UL File No.: E152602 Designed In: Inches Used With: 19419, 19429 and 19435 Electrical Current: 18.0A Physical Contact: Copper Alloy Plating: Tin or Gold 19417 Male Mechanical Contact Insertion Force: 1.0 lb. max.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal ■ Integrated interface seal and terminal position assurance (TPA) ■ Optional connector position assurance (CPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed In: Inches Mates With: 19419, 19429 Electrical Dielectric Withstanding Voltage: 2200V AC min.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance (TPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed In: Inches Mates With: 19418 Electrical Dielectric Withstanding Voltage: 2200V AC min. Insulation Resistance: 1000 Megohms Voltage: 600V Mechanical Mating force: 75N max.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance (TPA) ■ Optional connector position assurance (CPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback Electrical Dielectric Withstanding Voltage: 2200V AC min. Insulation Resistance: 1000 Megohms Voltage: 600V Mechanical Mating force: 75N max. Unmating force: 75N max. 5.84mm (.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance (TPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed In: Inches Mates With: 19418 Electrical Dielectric Withstanding Voltage: 2200V AC min. Insulation Resistance: 1000 Megohms Voltage: 600V Mechanical Mating force: 75N max.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 when mated ■ Integrated terminal position assurance (TPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ For inside panel mount application ■ Use with molded silicon panel gasket ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Dielectric Withstanding Voltage: 2200V AC min.
5.84mm (.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 when mated ■ Integrated terminal position assurance (TPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ For outside or inside panel mount application ■ Use with molded silicon panel gasket Electrical Dielectric Withstanding Voltage: 2200V AC min. Insulation Resistance: 1000 Megohms Voltage: 600V Mechanical Mating force: 75N max. Unmating force: 75N max.
5.84mm (.230”) Pitch MX150L™ Panel Mount Plug FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated terminal position assurance (TPA) ■ Simple crimp-and-poke application ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ For outside or inside panel mount application ■ Use with molded silicon panel gasket Electrical Dielectric Withstanding Voltage: 2200V AC min.
5.84mm (.230”) Pitch MX150L™ Sealed Panel Mount Plug FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Supports non-closed in panels ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG receptacle ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG ■ Tactile and audible mating feedback Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG receptacle ■ Tactile and audible mating feedback Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG receptacle ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
5.84mm (.230”) Pitch MX150L™ PCB Header FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Molded silicon panel gasket included ■ Available in tin or gold plating ■ Supports 14-22 AWG receptacle ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Electrical Contact Resistance: milliohms max.
FEATURES AND SPECIFICATIONS With the application of optional circuit plugs, the MX150L system supports the ability to implement sealed blank cavities in both plug and receptacle housings. The circuit plugs occupy and fully seal the unused cavity and can be extracted and replaced with a standard male blade or female receptacle terminal. This feature provides the ability to plan for possible future circuit additions while maintaining the sealing integrity of the mated pair.
7.62mm (.300”) Pitch MX150L™ Terminal FEATURES AND SPECIFICATIONS Features and Benefits ■ Mat seal friendly design features center seam and coined edges ■ High current ■ Low insertion force Electrical Current: 10-12 AWG—30.0A 8 AWG—40.0A Physical Contact: Copper Alloy Plating: Tin Reference Information UL File No.: E152602 Designed in: Inches Use with: 19432 19434 8, 10, 12 AWG Female Mechanical Contact Insertion Force: 1lb Durability: 25 cycles 10–12 AWG 8 AWG CATALOG DRAWING (FOR REFERENCE ONLY) .
7.62mm (.300”) Pitch MX150L™ Terminal FEATURES AND SPECIFICATIONS Features and Benefits ■ Mat seal friendly design features center seam and coined edges ■ High current ■ Low insertion force Reference Information UL File No.: E152602 Designed in: Inches Use with: 19433 Electrical Current: 10-12 AWG—30.0A 8 AWG—40.0A Physical Contact: Copper Alloy Plating: Tin 19431 8, 10, 12 AWG Male Mechanical Contact Insertion Force: 1lb Durability: 25 cycles 10–12 AWG 8 AWG CATALOG DRAWING (FOR REFERENCE ONLY) 1.
7.62mm (.300”) Pitch MX150L™ Receptacle FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance ■ High current ■ Field serviceable contact removal system ■ Simple crimp-and-poke application ■ Tactile and audible mating feedback ■ CPA connector position assurance included Reference Information UL File No.
7.62mm (.300”) Pitch MX150L™ Plug FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance ■ High current ■ Field serviceable contact removal system ■ Simple crimp-and-poke application ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed in: Inches Mates with: 19432 Use with: 19431 Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
7.62mm (.300”) Pitch MX150L™ Receptacle FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance ■ High current ■ Field serviceable contact removal system ■ Simple crimp-and-poke application ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed in: Inches Mates with: 19433 Use with: 19434 Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
7.62mm (.300”) Pitch MX150L™ Plug FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Integrated mat wire seal and terminal position assurance ■ High current ■ Field serviceable contact removal system ■ Simple crimp-and-poke application ■ Tactile and audible mating feedback Reference Information UL File No.: E152602 Designed in: Inches Mates with: 19432 Use with: 19431 Electrical Dielectric Withstanding Voltage: 2200V AC min Insulation Resistance: 1000 Megohms min.
FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Supports non-closed in panels ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Reference Information UL File No.
7.62mm (.300”) Pitch MX150L™ Sealed Panel Mount Plug FEATURES AND SPECIFICATIONS Features and Benefits ■ Environmentally sealed to IP67 ■ Mates with existing MX150L receptacles ■ Supports non-closed in panels ■ Field serviceable contact removal system ■ Tactile and audible mating feedback ■ Blind hole boss feature eliminates leak path and reduces extra sealing process during assembly Reference Information UL File No.
FEATURES AND SPECIFICATIONS With the application of optional circuit plugs, the MX150L system supports the ability to implement sealed blank cavities in both plug and receptacle housings. The circuit plugs occupy and fully seal the unused cavity and can be extracted and replaced with a standard male blade or female receptacle terminal. This feature provides the ability to plan for possible future circuit additions while maintaining the sealing integrity of the mated pair.
Semi-Automatic Bench Top Crimp Press Tooling FEATURES AND SPECIFICATIONS Features and Benefits ■ FineAdjust allows users to achieve target with little effort FineAdjustTM Applicator by adjusting on increments of 0.15mm (.0006”) for conductor crimp height and .063mm (.
Installation SEALED RECEPTACLE ASSEMBLY - SERVICEABILITY 1) Return TPA to pre-lock position - Carefully insert a standard screw driver into slot on top of TPA. - Carefully pry TPA forward and listen for audible click. - TPA is now in pre-lock position. 2) Release terminal from connector assembly - Insert and drive forward extractor tool to release terminal. - Pull terminal from rear of connector.
Mating/Unmating Locking Ramp CPA (connector position assurance) Locking Latch Plug Receptacle To Mate: 1. Firmly push connectors together until you feel them snap together, you should hear a click. This audible and tactile confirmation ensures the connectors are properly and fully mated. 2. Press CPA towards plug to engage the secondary lock. To Unmate: 1. Pull back CPA 2.
Notes 33
Notes 34
Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.com Asia Pacific North Headquarters Yamato, Kanagawa, Japan 81-46-265-2325 apninfo@molex.com Asia Pacific South Headquarters Jurong, Singapore 65-6268-6868 apsinfo@molex.com European Headquarters Munich, Germany 49-89-413092-0 eurinfo@molex.com Corporate Headquarters 2222 Wellington Ct. Lisle, IL 60532 U.S.A. 630-969-4550 Fax: 630-969-1352 Visit our Web site at http: // www.molex.com Order No.
