Brochure

Locking

Ramp

Plug

CPA (connector position assurance)

Locking Latch

Receptacle

Mating/Unmating

2. Press CPA towards plug to engage the secondary lock.

To Unmate:

1. Pull back CPA

2. Fully depress locking latch

Locking latch must be fully depressed to release the locking ramp on the plug and allow

the connectors to be separated!

3. Pull connectors apart

Locking latch shown down, cannot

unmate connectors

Locking latch shown fully depressed,

latch releases locking ramp

To Mate:

1. Firmly push connectors together until you feel them snap together, you should hear a

click. This audible and tactile confirmation ensures the connectors are properly and fully

mated.