Datasheet

ManualsBrandsMolex ManualsConnector ToolsCrimping tool 14 AWG 22 AWG

Hand Crimp Tool for MX150L™ Crimp Terminals

Doc No: ATS-638114400 Release Date: 04-05-04 UNCONTROLLED COPY Page 1 of 5

Revision: D Revision Date: 07-25-08

INSULATION

CRIMP

BRUSH

STRIP

LENGTH

BELL MOUTH

CRIMP HEIGHT

BEND

DOWN

BEND UP

ROLLING

CONDUCTOR

CRIMP

TWISTING

Hand Crimp Tool

Specification Sheet

Order No. 63811-4400

FEATURES

A full cycle ratcheting hand tool ensures complete crimps

Ergonomically designed soft handles

Precisely designed crimping profiles with simple contact positioning

Easy handling due to outstanding force ratio

SCOPE

Products: MX150L™ Crimp Terminals, 14-22 AWG.

Terminal Order No. Wire Size

Insulation Diameter

Maximum

Strip Length

Terminal

Series No.

Loose Reel AWG

mm² mm In. mm In.

19417-0047

19417-0053

19417-0011

19417-0029

19417-0049

19417-0025

19417-0031

19417-0051

19417-0027

19417-0033

14-16

2.00-1.27

2.87-3.53

.113-.139

4.20-5.00

.165-.197

19417-0048

19417-0054

19417-0024

19417-0030

19417-0050

19417-0026

19417-0032

19417

19417-0052

19417-0028

19417-0034

18-22

0.83-0.36

2.36-2.74

.093-.108

4.20-5.00

.165-.197

19420-0009

19420-0001

19420-0007

19420-0011

19420-0003

14-16

2.00-1.27

2.87-3.53

.113-.139

4.20-5.00

.165-.197

19420-0010

19420-0002

19420-0008

19420

19420-0012

19420-0004

18-22

0.83-0.36

2.36-2.74

.093-.108

4.20-5.00

.165-.197

DEFINITION OF TERMS

The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the scope.

TYPE 4A

Summary of content (5 pages)

PAGE 1
Hand Crimp Tool for MX150L™ Crimp Terminals Hand Crimp Tool Specification Sheet Order No. 63811-4400 FEATURES TYPE 4A A full cycle ratcheting hand tool ensures complete crimps Ergonomically designed soft handles Precisely designed crimping profiles with simple contact positioning Easy handling due to outstanding force ratio SCOPE Products: MX150L™ Crimp Terminals, 14-22 AWG. Terminal Series No. 19417 19420 Terminal Order No.
PAGE 2
Hand Crimp Tool for MX150L™ Crimp Terminals CONDITIONS: After crimping, the crimp profiles should measure the following (see notes on page 5). Terminal Series No. 19417 19420 Terminal Series No. 19417 19420 Bell mouth mm In. 0.25-1.25 .010-.049 0.25-1.25 .010-.049 Wire Size AWG mm2 14 16 18 20 22 14 16 18 20 22 2.00 1.27 0.83 0.83 0.83 2.00 1.27 0.83 0.58 0.36 Conductor Brush mm In. 0.15-0.65 .006-.026 0.15-0.65 .006-.026 Bend up Bend Down Degree 5 5 5 5 Conductor Crimp Ref. Insulation Crimp Ref.
PAGE 3
Hand Crimp Tool for MX150L™ Crimp Terminals 9. Carefully remove the crimped terminal. WIRE STOP BLADE WIRE STOP BLADE CONDUCTOR PUNCH RETAINER INSULATION PUNCH FEMALE LOCATOR WIRE RETAINER CONDUCTOR PUNCH INSULATION PUNCH MALE LOCATOR WIRE TERMINAL TERMINAL CONDUCTOR ANVIL INSULATION ANVIL Figure 2 CONDUCTOR ANVIL INSULATION ANVIL Note: To maintain a good brush control and a consistent bell mouth the crimping instructions must be followed.
PAGE 4
Hand Crimp Tool for MX150L™ Crimp Terminals Warranty This tool is for electrical terminal crimping purposes only. This tool is made of the best quality materials. All vital components are long life tested. All tools are warranted to be free of manufacturing defects for a period of 30 days. Should such a defect occur, we will repair or exchange the tool free of charge. This repair or exchange will not be applicable to altered, misused, or damaged tools. This tool is designed for hand use only.
PAGE 5
Hand Crimp Tool for MX150L™ Crimp Terminals PARTS LIST Item Number Order Number Description Quantity 1 63600-0520 Crimping Spring 2 2 63811-4475 Locator Assembly 1 3 63600-0525 Handle Spring 1 MALE LOCATOR (BLACK) Pull and Turn to Flip Locators FEMALE LOCATOR (GRAY) RATCHET RELEASE LEVER 3 2 LOCATOR ASSEMBLY WIRE STOP 1 HANDLE SPRING CRIMPING SPRING (2) Figure 3 Americas Headquarters Lisle, Illinois 60532 U.S.A. 1-800-78MOLEX amerinfo@molex.