User Manual ........................................................................................................................................................4 Chapter 1 Features .............................................................................................................................................................1 Chapter 2: Overview ............................................................................................................................
User Manual 5.8 Record search...................................................................................................................................................... 38 5.9 Mute .................................................................................................................................................................... 39 5.10 Manual Record......................................................................................................................................
User Manual 1. Read Instruction All the safety and operating instruction should be read before the equipment is operated. 2. Power sources This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your equipment dealer. 3.
Chapter 1 Features Function Brief and Description Real time monitoring Double video output; with monitor, VGA virtual output port or HDMI Output; Support net-viewer and MP live surveillance and also support zoom in/out, auto sequence and PIP display. Record H.
User Manual 2.1 Front Panel Reminder: DVR is the abbreviation of Digital Video Recorder Equipment. 2.1.1 4CH CIF/D1 DVR Front Panel Item Key title or Indicator Remark Function & Description 1 Power Indicator PWR If the “Green” indicator is on the system is getting power normally. 2 IR Receiver 3 HDD Indicator 4 Channel select: CH1 CH2 CH3 CH4 CH select key 5 QUAD On Live or Playback mode, switch to Quad display.
User Manual 11 REC Press the button to start manual record. 12 MENU/ESC Enter into Main menu, exit or stop playing 13 Up key Move up 14 SEL/EDIT select [Enter] / [Edit] operation 15 Down key Move down 16 PTZ Enter into PTZ control interface 17 Power button Power on/off List 2-1 2.1.
User Manual 9 REW Move to left; Rewind function; decrease PTZ rotation speed and parameter value; On preview mode, holding pressing the button to switch GUI operation device 10 PAUSE Pause / play frame by frame manually 11 PLAY Enter into Pop-up Menu; Play record file. 12 FWD 13 STOP Right key, F. Forward key; increase PTZ rotation speed and P l Stop playing or stop manual record 14 REC Press the button to start manual record.
User Manual 8 DOWN 9 LEFT / Move down Move left / RWD 1. Number 1~9 stand for numeric 1~9 and CH 1~9. Channel 10 Select & Single Channel numeric and numeric key input Numeric key 2. CH11-CH16 select method: press firstly numeric key 1 and then other numeric 0,1-9 and CH key. For example CH16 select firstly key CH1~9 press 1, and then press 6. 3. Holding press key 0 for three seconds may convert current output device 11 Rec.
User Manual 11 8 CH-8 Numeric key 8 display, 12 9 CH-9 Numeric key 9 press 1, and then CH-10:Numeric key0 press 6. firstly Note: Holding to 13 press key 0 for 0 three seconds may convert current output device 14 15 16 17 18 19 20 21 Display Multiple CH display Audio Live Quad display, 9-split display and 16-split display Mute key MUTE Manual record Pause PAUSE/FRAME Play PLAY Stop STOP Menu MENU/ESC PTZ PTZ UP Move up Move down control Rec.
User Manual 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31\32 33\34 35 BACKUP ALARM NET DISPLAY PIP SEARCH STOP REC MUTE PTZ ESC MENU USB JOYSTICK OPEN Backup file indicator Alarm indicator Net indicator Rewind Frame into Play Pause Fast Forward Multi-screen display;switch Picture in Picture function Search video Stop key Video start key Soft-switching key Mute key PTZ Operation ESC key MENU key USB Shuttle key Open the revolution door 2.2 Rear Panel 2.2.
User Manual 2.2.
User Manual 2.2.
User Manual 2.2.
User Manual 2.2.
User Manual 11 USB Port Connect USB device (Flash Drive, Hard Drive and Recorder etc) 12 RS-485/Sensor/Alarm RS485/Sensor/Alarm interface (see pin outs below) 13 Power Port Connect power supply - DC12V 5A 2.2.
User Manual 2.3 4/8-CH Remote Controller Item 1 Key title 1-8 2 Key function Channel select 1-8; Numeric key 9 0 Numeric key; Clicking numeric “0” allow you switch to GUI (Graphical user Interface) function 3 ALL Multiple display mode 4 Menu 5 Up arrow key, Volume adjust 6 Down arrow key, Volume adjust 7 8 Enter into Main menu/Exit / Left/Down key, Decrease/increase control bar SEL Select key/Edit key; Confirm the selected operation.
User Manual 2.4 16-CH Remote Controller Key Title Key Function REC Press the button to enter into manual record.
User Manual Mouse Operation Except using buttons of front panel or remote controller, you also can use mouse to perform system operation. TYPE Function In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly.
User Manual Chapter 3 DVR INSTALLATION HDD Installation Applicable to the model with HDD drawer Please do not Install or take out hard drive when DVR is running! Caution (1) The model has a HDD drawer. Please use provided key to take out the HDD drawer and put HDD into the drawer correctly.
User Manual 4.1 System Initialization Picture 4-1 4.2 Live Interface Picture 4-2 area outside the menu allows you exit the Pop-up menu. Note: When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main menu Alarm] to set HDD loss, HDD space not enough and alarm output to “off” 5.
User Manual 5.
User Manual 5.3 Main Menu Picture 5-2 5.3.1 Display 5.3.1.1 Live mode Go to option and enter into the setting interface shown as Picture 5-3. Channel: allow you setup the channel you desired. Name: allow you setup the channel name, and system support up to eight characters or four Chinese characters. Position: allow you setup the display position of each channel. Color: Click [Setup] option to enter into the [Color setup] interface shown as Picture 5-4.
User Manual 5.3.1.2 Output mode Picture 5-5 Picture 5-6 Picture 5-7 Picture 5-9 Picture 5-8 Video output: Support CVBS output Live and Spot mode simultaneously, and Live is main output, and Spot is auxiliary output. CH Sequence: the option is defaulted to “Off” and sequence time is 5 second. User can activate the option as per request. Rotate time: allow you set sequence time, and minimum time can be set to 3 seconds.
User Manual Picture 5-10 Picture 5-11 5.3.1.3 Privacy Zone The function Allow you setup privacy zone parameters according to Picture 5-12. Each channel could set up to four privacy zones, and please follow below steps to set: 1. Select the area no (Area 1 ~ Area 4); 2. Click [Setup] to adjust position of mask area; 3. After finishing position adjust, click right key of mouse to return back [Privacy zone] interface; 4. Click [Apply] to save the above setting. Picture 5-12 5.3.
User Manual Picture 5-14 5.3.2.2 Schedule Click [Main Menu Record Schedule] to enter into the interface shown as Picture 5-15. Picture 5-15 After you complete the schedule you activate it by clicking the [Apply] button. You can also click on the Default button to use the system defaults. Explanation: Under the menu and menu, original color stands for no record, “Red” stands for alarm record, “yellow” stands for Motion record and “Green” stands for normal record. 5.3.2.
User Manual 5.3.3 Search 5.3.3.1 Record Search Click [Main Menu Search Record Search] to enter into the interface shown as Picture 5-17. Picture 5-17 Time Search: In the , user can search for a specific date and time for a recording and view it in Playback mode. This is useful for hunting a specific recording of an incident if you know the date and time it occurred.
User Manual 5.3.3.3 Event Search Click [Main Menu Search Event Search] to enter into the interface shown as Picture 5-20. You could highlight and double-click the desired record for playback. And you also can filter the records you want to view based on date, time, and channel and record mode search. Picture 5-20 (Last page): go to the last page. Clicking the [last] button will make you enter into last page quickly. ALL (Select All): Allows you to select all the events on the current page.
User Manual Picture 5-24 After backup finished, please click [OK] button shown as Picture 5-24. Note: File will be saved as *.264 format. You could playback the record files via Dvr Client player. When installing Dvrclient, system will auto install the player. Please make sure the back-up device connect well before backup. 5.3.3.4.2 back-up file based on time Also allow you back-up record files based on time.
User Manual Slow button: click the icon to play the backup record at 1/2, 1/4, 1/8 and 1/16 speed. FF button: click the icon to fast forward the backup record at x2, x4, x8 and/or x16 s ed. Open: click the icon to open one record file. click the icon to enter into full screen mode. Click the icon to never place one target to top. Click the icon to place one target to top. Click the icon to place the playing record to top.
User Manual 5.3.4 Network 5.3.4.1 Network set Click [Main menu Network Network] to enter into the below interface shown as Picture 5-30. Picture 5-30 DNS: DNS server is generally provided by local ISP.
User Manual 5. The Subnet Mask, gateway and DNS server should be consistent with your router’s configurations. 6. Input DNS address. Please check router firstly. The setting should be consistent with router’s 7. Click [Apply] button 8. Now you could remotely visit the DVR via IP http: // public net IP: web port (such as: 8080) http: //intranet IP: web port (such as: 8080 - only use for Intranet) Picture 5-33 5.3.4.
User Manual Picture 5-35 Audio: When tick-selecting the option 5.3.4.4 Email set Click [Main Menu Network Email] option to enter into the email set interface shown as Picture 5-36 SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Please set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.
User Manual Picture 5-38 Please note that the server port could not duplicate the port you have set to network set. 5.3.4.6 DDNS Set DDNS (Dynamic DNS) is a service that register a domain name and the floating IP address with the DDNS server so that the domain name can be routed to the IP address even if the IP address is changed in a dynamic IP system.
User Manual Latch time: you can set how long the buzzer will sound when object move is detected (10s, 20, 40s, 60s); Show Message: You can set show message on the screen when motion alarm is detected. Buzzer time: you can set how long the buzzer will sound when motion is detected (10s, 20, 40s, 60s); Send Email Allows you set the alarm images is issued to a specified email. Full screen Alarm: The function is defaulted to “On".
User Manual external alarm is triggered, the corresponding channel will be switched to the full screen mode. Record Channel: allow you select channels you want to record. Post Recording: you can set how long alarm record will last when alarm ends (30s, 1minute 2minute 5minute); Copy: allow you copy all the setting of one channel to other ones.
User Manual NO: indicate HDD no pre-seted by system. Status: It will be available only when HDD have been formatted. Total Space – Total size of the hard drive currently installed. Free Space – Total amount of free space available on the hard drive currently installed. Useable Rec. Time – Free space currently available in hours. Auto-overwrite – When set to ENABLE the DVR will record over the oldest files on the hard drive.
User Manual Picture 5-46 5.3.7 System 5.3.7.1 General Click [Main Menu System General] to enter into the interface shown as Picture 5-47 You will be allowed to modify system date, time, date/time format, language, video format and auto logout. And click [DST Setup] button to enter into the below interface shown as Picture 5-48. Picture 5-47 5.3.7.2 DST Set Picture 5-48 5.3.7.
User Manual Picture 5-50 Note: The above change will be available only when system connected to internet. And When NTP function is set to “Enable”, system will calibrate the time at every 00:07:50 and every start-up. 5.3.7.4 Users Click [Main Menu System users] option and then enter into the interface shown as Picture 5-51 Picture 5-51 User name consist of eight characters, password consist of 0~9 and its fixed-length is 6 bit.
User Manual Backup: Tick-select the option, the user is allowed to backup the record of all the channels. Live: Tick-select the option and the user is allowed to view all the live images for all the channels. Playback: Tick-select the option and the user is allowed to playback the record you selected. PTZ control: Tick-select the option and the user is allowed to perform the PTZ operation for the selected channel. 5.3.7.
User Manual 5.3.8.2 Event Click [Main menu Advanced Event] to enter into the interface shown as Picture 5-57 Picture 5-57 Buzzer time: you can set how long the buzzer will sound when abnormal alarm is triggered (Off, 10s, 20, 40s, 60s); Send Email Allow you issue the alarm images to a specified email. 5.4 Menu Lock Considering a system safety feature you can click [ ] icon to lock system interface when leaving the DVR.
User Manual We introduced setting PTZ parameters previously in section 5.3.6.2 – PTZ Set. Here we will discuss how to operate PTZ controls. Click the [ ] icon to enter into [PTZ control] menu shown as Picture5-60. Now user can control the camera with Pan, Tilt and Zoom capabilities. Click [Zoom-/+] button to zoom in / out the image; Click [Focus -/+] button to focus the image; Click [Iris -/+] button adjust iris to open or close.
User Manual 5.9 Mute Click the [ ] icon, control the mute of DVR. or press button on the front panel and Remote controller to 5.10 Manual Record You can start manual record function, or you also can click [ ] button on the Front panel or Remote controller to activate manual record. Please stop record manually once you activate manual record. 5.11 Stop record To stop record quickly, please click the icon [ or remote controller. ] or [Stop] button on the front panel 5.
User Manual 6.1 Plug-in download and installation Open your web browser and input the IP address and web port of DVR, such as http://172.18.6.202:8080/ . If your computer is connected to internet, it will download and install “ActiveX” Plug-in automatically. If your computer system is Vista, you may need to setup the user authority. Details please refer to the below picture: Start setup control panel Tick use UAC to help protect your computer and confirm OK .
User Manual 6.2 Web Application Manager Log-in After plug-ins installation, please input user name, password and client port; and select or , and then allow you tick-select ; Now you click [Log-in] button, and then you are allowed to access a remote DVR and monitor live video images using Web browser anytime from virtually anywhere. Noted that defaulted password is empty. System allows Administrator to set new password as per instructions in section 6.3.
User Manual Volume switch Record icon: record will be saved to a specified position after starting record. Snapshot function: allow you capture the live images and save it to a specified position. The im should be saved as *.bmp format. clicking the icon will close/open the current channel’s live mode Or click the right key of mouse on each window to pop up the interface shown as Picture 6-4. Picture 6-4 CH Display mode Allow you open all the channels.
User Manual Video control Recover ex-factory default value. Picture 6-6 6.3.2 Playback Click [ ] icon to enter into interface shown Picture 6-7. Picture 6-7 The Web Application Manager supports up to 4 channels playback simultaneously.
User Manual Picture 6-8 Secondly, select record type (Normal record, Alarm record and All) and then click < > button shown as Picture 6-9. On the time axis, red part stand for alarm record, yellow stand for normal record and original part stand for no record during this period. Picture 6-9 If you tick-select < > option, that means the selected channel will playback synchronously; otherwise, you could separately control the channels playback. Thirdly, Click [ ] icon to start record playback.
User Manual Detail brief description is shown as below list Key Description Key Description Play Pause Stop Playback control bar (x1/2,1/4,1/8, By frame Clip Capture Quad mode Download Full screen Open all the channels Stop all the channels Record file clip After opening playback, click [ ] icon to clip the selected file; and click again to stop the clip function. Record clip file will be saved as *.
User Manual Picture 6-12 Tick-select the record file you want to download and click [Start download] System will download the record file in turn and save to local PC. 6.3.3 Configuration Click [Configuration] option to enter into the [Config] interface shown as Picture 6-13 and allow you set Display configuration, Record, Network, Alarm, Device, System parameters and Advance according to your actual request. 6.3.3.
User Manual Picture 6-14 6.3.3.2 Record Click option to unfold its sub-options: Record parameter, Schedule and Main stream. 1、 Record Parameters: Under [Record parameters] option, allow you set channel, record enable, pack time and Pre-record status shown as Picture 6-1 Picture 6-15 2、 Schedule: Detailed parameters please refer to DVR local setting. Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O triggered record.
User Manual Picture 6-17 This figure is only for D9016 / CIF model reference 6.3.3.3 Network Parameters Unfold option to enter into its sub-options: Network, sub stream, Email, mobile and DDNS configuration. 1、 The model support three network type, including Static, DHCP and PPPoE Static: System default as its network type. User could allocate IP and perform Port forwarding for DVR according to different router. When set to “On”, user no needs to perform port forwarding.
User Manual Set network type to “PPPoE” shown as Picture 6-20. consistent with DVR local setting. Its user name and password should be Picture 6-20 2、 Sub stream (shown as Picture 6-21): Relative parameters should be consistent with DVR local setting. Picture 6-21 3、 Email setting: Click [Email setting] option to allow you set alarm email configuration parameters shown as Picture 6-22. Detailed parameters should be consistent with DVR local setting.
User Manual 4、 Mobile: Its user name, password and port No should be consistent with DVR local setting shown as Picture 5-23. Picture 6-23 5、 DDNS Setting: After user applies for DDNS service shown as Picture 6-24, you could enable function under any one network type mode (Static, DHCP and PPPoE). Now you remotely visit the DVR through domain name (http://domain name: port No). Details setting should be consistent with DVR local setting. Picture 6-24 6.3.3.
User Manual Picture 6-25 1、 Motion Detection: allow you configure its , , and etc. Details setting should be consistent with DVR local setting (Shown as Picture 6-26). Picture 6-26 2、 I/O Alarm: allow you configure , , and etc. Details setting should be consistent with DVR local setting (Shown as Picture 6-27). Picture 6-27 6.3.3.
User Manual Picture 6-28 2、 PTZ Configuration (shown as Picture 6-29): details setting should be consistent with DVR local setting. Picture 6-29 6.3.3. 6 System Click option to unfold its sub-options: General, Users and information. 1、 General: User could check DVR’s language and video system, and also set system time, date format, DST and NTP shown as Picture 6-30. Details setting should be consistent with DVR local setting.
User Manual 2、 Users: Allow you configure user name and password shown as Picture 6-31. Details setting should be consistent with DVR local setting. Picture 6-31 3、 Information: Allow you check out device name, number, type, MAC address, software version, IE version and hardware version shown as Picture 6-32. Picture 6-32 6.3.3. 7 Advanced Click to unfold its sub-options: System update, Load default, Events and system maintain etc.
User Manual Please follow below steps to upgrade the system: a. Select the upgrade file’s path shown as Picture 6-34. Please note that the format of upgrade file is *.sw. Picture 6-34 b. Click , now processing bar will display current upgrade status shown as Picture 6-35. Picture 6-35 2、 Load Default: allow you recover defaulted parameters of DVR remotely shown as Picture 6-36. Details setting should be consistent with DVR local setting.
User Manual 3、 Events: allow you configure abnormal type, buzzer output time, and alarm email and show message shown as Picture 6-37. Details setting should be consistent with DVR local setting. Picture 6-37 4、 Maintain: allow you set auto system maintain for DVR remotely shown as Picture 6-38. Detail setting should be consistent with DVR local setting. Picture 6-38 6.3.
User Manual Chapter 7: Appendix 7.1 Operation Function Table Type Title Set system date/time, display format and day-light saving time 26 Language select Set system language 27 Record search Time based search, channel based search and rec. mode based search.
User Manual Menu button Enter Clicking the button will save current parameter. Default Recovery Clicking the button will recover current parameters to system defaulted value. after clicking [Enter] button ESC Clicking the button will exit the current menu. ,1Time setting Adjust system time 26 Format HDD 15 Set network type and web port (except of 10 ,2HDD Manage ,3Net setting Basic application Guide The option will be effective PPPoE, other type need forward web port to router of DVR.
User Manual www.qq.com @qq.com smtp.qq.com pop.qq.com smtp.163vip.net popx.163vip.net @sina.com.cn smtp.sina.com.cn pop3.sina.com.cn @yahoo.com.cn smtp.mail.yahoo.com.cn pop.mail.yahoo.com.cn @yahoo.com smtp.mail.yahoo.com pop.mail.yahoo.com google.com @gmail.com smtp.gmail.com(465/587) pop.gmail.com(995) www.china.com @china.com smtp.china.com pop.china.com www.sohu.com @sohu.com smtp.sohu.com pop.sohu.com smtp.163.net pop.163.net smtp.163vip.net pop.163vip.net 163.net www.
User Manual 8. Q: Can we records whilst playing-back? A: Yeah, you can do it. The system support you records whilst playing-back. 9. Q: Can we erase some recorded file from DVR. A: Considering the safety factor, you can’t delete the recorded file directly from the device. When you actually erase all the recorded files, please select HDD format function 10.
User Manual 8-CH-CIF 60
User Manual 8-CH-D1 16-CH CIF 61
User Manual 62
User Manual 16CH-D1 7.
User Manual The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce. But no guarantee is given as to the correctness of its contents. We do not undertake any responsibility for the harms cause by using our product.
