User Manual Contents SAFETY INSTRUCTION ........................................................................................................................................................ 3 CHAPTER 1 FEATURES .................................................................................................................................................... 4 CHAPTER 2: OVERVIEW ..............................................................................................................................
User Manual 5.5 RECORD SEARCH ..................................................................................................................................................................... 25 5.6 PTZ CONTROL ........................................................................................................................................................................ 25 5.7 RECORD ..................................................................................................................
User Manual Safety Instruction 1. Power sources This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your equipment dealer. 2. Objects and Liquid Never push objects of any kind through openings of this equipment and / or spill liquid of any kind on the equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. 3.
User Manual Chapter 1 Features Function Brief and Description Real-time Monitoring 2 CH video output, support VGA virtual output, Net-viewer and Mobile Live monitor, and also support zoom in/out, auto sequence and PIP display. Record Function H.264 video compression format; record quality adjustable, multiple record modes (Always, Scheduled, Manual, Alarm, Motion detection and remote record) Record storage Support SATA large capacity HDD and save real-time record image to HDD.
User Manual Chapter 2: Overview 2.1、Front Panel 2.1.1、4-CH DVR Front Panel Item Key title or Indicator Remark Function & Description 1 2 3 Power button Power IR Receiver PWR Power on/off If the “Green” indicator is on the system is getting power Receives IR signal from Remote Controller 4 HDD Indicator HDD When the “Red” indicator flashes it means the hard drive is being read or written to.
User Manual 2.1.
User Manual 2.2、Rear Panel 2.2.1、4-CH Rear Panel layout A 2.2.
User Manual 2.3 Remote Controller Item 1 Key title Key function Channel select 1-8; Numeric key 1-8 9、0 Numeric key; Clicking numeric “0” allow you switch to GUI function 3 ALL Multiple display mode 4 Menu 5 ▲ Up arrow key, Volume adjust 6 ▼ Down arrow key, Volume adjust ◄/ Left/Down key, Decrease/increase parameter value of control bar SEL Select key/Edit key; Confirm the selected operation.
User Manual Mouse Operation In addition to the buttons of front panel or remote controller, you also can use mouse to perform system operation. TYPE Function In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly.
User Manual Chapter 3 DVR INSTALLATION 3.1、Installing HDD Caution:Please do not Install or take out hard drive when DVR is running! Firstly, loosen the screws of case and remove the upper cover shown as below Picture. Then, connect data cord and power cable of HDD, put the HDD to its holder and fix it shown as below Picture. Lastly, tighten the screws of the upper cover. Note:If users need higher performance HDD, strongly recommend to use special HDD for Security Protection. 3.
User Manual Chapter 4: DVR Start up 4.1、System Initialization After connecting the Power cable of DVR to wall outlet and pressing the Power button on the front panel, you will enter into the system initializing screen shown as Picture 4-1. Note: The pictures illustrated by this manual will differ depending on your different monitor. Picture 4-1 Picture 4-2 4.2、Live screen After finishing initialization the system will enter into Live screen.
User Manual you could perform parameter setting and operate on Main Menu, Multi-Pics, PTZ, PIP, Rec. Search, Mute, Manual record, Start Rotate, Start Cruise and GUI to VGA etc. Note: options of the Pop-up menu will differ depending on different parameter setting and application environment. 5.
User Manual 5.3 Main Menu After clicking right button of mouse, pop-up menu appears on the screen. You can click [main menu] option on pop-up menu mode to enter into Main menu interface (Shown as Picture 5-2). In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, Device and System setting etc. Picture5-2 5.3.1 Display setup Go to [Main menu Camera] to set up the CH name and position for each channel shown as Picture 5-3.
User Manual [Bit rate] include three options – Best, Good and Normal. [Frame rate] include two options – Fixed and Manual. When set to “Manual” and click [Frame rate setup] option, you may allocate the frame rate for each channel. [Audio] option allows you turn audio on/off. [Mode] allow you select record modes, including Always and Scheduled. To record 24 hours a day set the [Mode] to Always. To record on motion or a set schedule, select the [Schedule] option.
User Manual http://internet IP: web port (such as 8080) http:// intranet IP: web port (such as 8080 only available at the same intranet) When selecting Static from the Type, user can directly set IP address, Subnet Mask, Gateway, Web Port and DNS shown as Picture 5-9. Media Port: manually forward this port to router, details please refers to Picture 5-12. Web port: equal to Web Application Manager’s web port no and manually forward this port to router.
User Manual Router’s Port Forwarding Port forwarding is required when you want to access the DVR connected to the router from outside of the router’s network. 1. Input router’s IP address from IE-based browser to open the Router configuration interface; 2. Click [Transmittal rule] option to take you to the port forwarding instructions for your router; 3. Set the corresponding parameters illustrated in Picture 5-11. When server port and web port forwarding the DVR IP address, user can visit the DVR remotely.
User Manual NEXT (Next page): When viewing event list, clicking [Next page] button will take you to the page after the one you are currently viewing (except the last page). LAST (Last page): Indicates the last page of recording history you have searched. When you view other pages, clicking [Last page] button will take you to the Last page. ALL (Select All): Allows you to select all the events on the current page.
User Manual Export: User can export all the logs which have been searched to U flash disk and save it as TXT format. Before exporting the logs, please make sure you have connected the U flash disk well. Detail operations please refer to Picture 5-18. After Log export success, please click [OK] button shown as Picture 5-19. 5.3.5 Playback Player 1. Copy backup file to your PC; 2. Open Playback Player, and then click [+] button to open the file shown as Picture 5-20 Note: Please select the file with *.
User Manual [Add]: click the button to add one record file [Del]: click the button to delete one record file. [Del all]: click the button to delete all the record files in the event list. 5.3.6 Device Manage Objects in include HDD, Alarm, PTZ, Mobile and Motion. Click [Main Menu Device Management] option to enter into the window shown as Picture 5-23. Picture 5-23 5.3.6.
User Manual Note: It is an important first step when configuring your DVR to make sure that the hard drive (HDD) options are correctly set. So, it is strongly recommended that you do format the HDD before start the first record. 5.3.6.2 Alarm Setup Click [Alarm Config] on the bottom of the [Alarm setup] screen to enter into the interface shown as Picture 5-26.Now you are allowed to set detailed alarm parameters.
User Manual SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Generally Gmail.com server set SSL to [On], and other mail server to [Off]. If your setting is still not right, please contact the web site where you have applied for your email box to get SMTP port and SSL of mail box. SMTP Port: indicates sender port of SMTP server.
User Manual 5.3.6.3 PTZ setup Enter into [Main menu Device PTZ Setup] to select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status respectively. Picture 5-30 Picture 5-31 5.3.6.
User Manual After entering into menu, you are allowed to set time/date, password, language and A/V, check system information and perform system maintenance. Picture 5-34 Picture 5-35 Picture 5-36 5.3.7.1 Time Set Click [Main menu system] and enter into the time set interface shown as Picture 5-35. Now you can adjust system date/time, date/time format and time zone. NTP: the model provides NTP service. When NTP function is set to , select relative NTP server (include: time.windows.com; time.
User Manual Picture 5-42 Picture 5-43 Video System: allow you set Camera system (PAL, NTSC). VGA Resolution: include four options - 1280×1024、1024×768、800×600 and 1440×900. OSD Device: allow you select video output device, Main output and VGA. User can hold pressing [Rew] button on the front panel to convert output device quickly. Poll time: allow you select sequence time between from 5s and 300s.
User Manual Picture 5-46(b). Reboot: Click the [Reboot] button to restart the device manually. Power off: the button allows you cut the power after making sure the DVR shutdown. Picture 5-46(a) Picture 5-46(b) Picture 5-47 Note: 1. Please obtain the updated program from local supplier before system updating. 2. Please not cut power and unplug U flash disk during the update. 3. System will automatically restart after finishing system update. 4.
User Manual Total: set up pre-set bit quantity Pre: indicates starting point cruised. System default point is 01. STP:sets the stop time at each point : allow you go to a specific preset point. : allow you set a set of specific preset points of a PTZ camera. 1. Select a camera you desire to set a preset point; 2. Adjust the camera in a desired direction 3. Click [Set] to set the point as preset point 4. Click [Save] to save the preset point 5. Follow the above steps to add one more preset point.
User Manual Chapter 6: Web Application Manager 6.1 Plug-ins download and installation 1. Open your web browser and input the IP address and web port of DVR; 2. If your computer is connected to internet, you will be prompted to download and install “ActiveX Control”; 3. You may have “Windows Security Alert” that attempts to block this with the windows Firewall. In that case, click [Unblock] button to continue your installation processing. 4. The Vista and Win7 system user may need to set user authority.
User Manual 6.3 Web Client Interface 6.3.1 Menu Bar Menu bar: include [Live], [Playback], [Remote setting], [Local Setting] and [Logout] option on the left-up corner. 6.3.1.1 Live mode After successful web client log-in, you will enter into the Live interface shown as Picture 6-3 and simultaneously Audio / Video will be automatically connected well (Shown as Picture 6-2(a) and (b).
User Manual PTZ Control 1. PTZ direction control: the buttons allows you control PTZ moving direction. 2. Zoom, Focus and Iris control: the buttons allows you control PTZ moving direction, zoom, focus and iris. 3. Preset bit control Pan and Tilt Pos: indicates starting point you desire to cruise firstly. : On Live mode, enter preset point No you want to display and click the icon to load the last preset point you set.
User Manual Display set Enter into [Channel] menu shown as Picture 6-5(a). Picture 6-5(a) Picture 6-5(b) Click [Copy to] option on the right-bottom corner of the interface to copy all the remote set to any channel shown as Picture 6-5(b). Record Set Enter into [Record Set] option to set record control parameters, including record enabling, audio enabling, Pack time, Record mode and Timer Rec. schedule etc. (shown as Picture 6-6).
User Manual tick-select if the alarms can be sent to email or transferred to full screen mode. Picture 6-9 Network Configuration Click [Network Configuration] option to enter into the interface shown as Picture 6-10, and allow you set , , , and items. Details please refer to section 5.2.3 – . Picture 6-10 Click item to allow you set basic network parameters and network type shown as Picture 6-11.
User Manual Device Parameters item include HDD info (Picture 6-15), PTZ (Picture 6-16), 3G network (Picture 6-17) and Motion parameters (Picture 6-18 and Picture 6-19) etc. Click and check out current HDD information. Picture 6-15 Click to set PTZ parameter value, details please refer to section 5.3.6.3-. Picture 6-16 As for 3G network and motion parameters set, please refer to the previous section.
User Manual Device Manage Extend [Device Manage] option to enter into sub menus – System set shown as Picture 6-20, Picture 6-20 and Authority set shown as Picture 6-21, and DST set shown as Picture 6-22, Picture 6-21 Picture 6-22 and version information shown as Picture 6-23. 6.3.3.4 Local set Picture6-23 The option allows you set [Record Save Path], [Frame Save Path] and [File Save Path] shown as Picture 6-24.
User Manual Chapter 7: Specifications Device Parameter D9104 D9108 Video System NFSC/PAL(Optional) Video/Audio Compression Format Video:H.
User Manual Chapter 8: Appendix 8.1 Record Alarm setting Please refer the below matrix: “⊥” stand for “only alarm but no record”; “AMR” stand for “alarm record”; “NLR” stand for “normal record”; and “NOR” stand for “ no record”. Once alarm is triggered, alarm icon will occur, and when many alarms are triggered, alarm remarks will occur on the screen.
User Manual google.com www.china.com www.sohu.com Mail.163.com Mail.163vip.com Mail.tom.com Mail.263.com x263.net 263.net.cn 139 mail box 21cn.com Vip.21cn.com etang.com elong.com @yahoo.com @gmail.com @china.com @sohu.com @tom.com @263.net @139.com smtp.mail.yahoo.com smtp.gmail.com(465/587) smtp.china.com smtp.sohu.com smtp.163.net smtp.163vip.net smtp.tom.com smtp.263.net smtp.x263.net smtp.263.net.cn smtp.139.com smtp.21cn.com vip.21cn.com smtp.etang.com smtp.elong.com List 8-3 pop.mail.yahoo.
User Manual 8.
User Manual 8CH – Type A Type B 38
The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce. But no guarantee is given as to the correctness of its contents. We do not undertake any responsibility for the harms cause by using our product.