Operation Manual
User Manual
7
Chapter 4: DVR Start up
4.1 System Initialization
Picture 4-1
4.2 Live screen
Picture 4-2
Note: When internal HDD is not connected or an error occurs, the character “H” will appear on the first channel
of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into
[Device manageAlarm setting] to set HDD loss, HDD space not enough and alarm output to “off”.
Chapter 5: DVR Menu
5.1 Pop-up Menu
Picture 5-1
You can access a pop-up menu by right-clicking the mouse any area
on live mode shown as Picture 5-1. Options of the Pop-up menu may
differ depending on parameter settings, operation mode and
application environment.
After connecting the Power cable of DVR to wall
outlet and pressing the Power button on the front panel,
you will enter into the system initializing screen shown as
Picture 4-1
After finishing initialization the system will enter into Live
screen. Picture 4-2 is the 16-split display defaulted by
system, which is showing no video input status. Once there
are video inputs, the screen will display live images from the
cameras. In Live mode, if you use the mouse to double-click
the live image of any channel, the image will be maximized to
full screen, by double-clicking again, image will be come
back to 16-split display mode; clicking the right button of the
mouse will enter into Pop-up Menu; clicking the left button of
the mouse allows you select menu items; and clicking any
area outside the menu allows you exit the Pop-up menu.