Operation Manual
User Manual
9
5.2 Main menu
Picture 5-2
5.2.1 Display setup
Go to [Main menuCamera] to set up the CH name and position for each channel shown as Picture 5-3.
Picture 5-3
Picture 5-4
Explanation：
1、 The modifications will be available after clicking [APPLY] button on the bottom of the sub-menu windows
and being prompted to save and then clicking [ok] button.
2、 If you want to cancel the modification, click [Exit] button to exit the menu.
3、 When clicking [DEFAULT] button, all system default values will be reset to default value.
System default value indicates the ex-factory default setting.
5.2.2 Record setup
Click [Main Menu] [Record] to enter into [Record Setup] menu (Shown as Picture 5-5).
Picture 5-5
[Frame rate] include two options – Fixed and Manual. When set to “Manual” and click [Frame rate setup]
option, you may allocate the frame rate for each channel.
After clicking right button of mouse, pop-up menu
appears on the screen. You can click [main menu] option on
pop-up menu mode to enter into Main menu interface
(Shown as Picture 5-2). In Main Menu mode, you can control
device management settings, such as Display, Record,
Network, Search, Device and System setting etc.
You can set up whether each channel can be previewed or
not under Live display and/or record mode, enable live time or
not under live screen and set up record time or not on the
record history.
Please note that the name of each channel supports up to
eight characters or four Chinese characters.
Copy function: allow you copy all data of one channel to
any other channel.
[Record] option allows you set up recording
status (Enable/Disable) of each channel.
[Audio] option allows you turn audio on/off.
[Quality] include three options – Best, Good and
Normal.
[Pack time] indicates maximum continuous
record time (15, 30, 45 and 60 min).
You can adjust image brightness, saturation, contrast
and hue parameters of each channel after entering
into [Color] menu.(shown as picture 5-4).