Operation Manual
User Manual
10
Enter into [Main MenuNetwork Setup] to setup the network
configuration (Shown as picture 5-7):
After selecting network mode - such as DHCP, PPPOE or static
allocation- and setting up web ports，you can visit DVR remotely
through a network or internet.
[Mode] allow you select record modes, including Always and Scheduled. To record 24 hours a day set the
[Mode] to Always. To record on motion or a set schedule, select the [Schedule] option
When setting [Mode] to Schedule, the schedule screen will appear as shown in Picture 5-6.
Picture 5-6
After you complete the schedule setting please activate it by clicking the [Apply] button.
Please note that 01~07H is defaulted to No record, 08~18H to Normal and 19~00H to Alarm.
Explanation: On the [record Set] and [Search] mode, original color stands for no record, “Red” stands for
alarm record, “Green” stands for normal record.
5.2.3 Network Setup
Picture 5-7
DNS: DNS server is generally provided by local ISP. Herein please enter the IP address of your DNS.
Note: When there are multiple DVRs at the same LAN, you need to change the MAC address.
When selecting DHCP the router will allocate DVR IP address automatically after you exit the menu. The
IP address of the DVR might change whenever the unit is turn on.
When selecting Static from the Type, user can directly set IP address, Subnet Mask, Gateway, Web Port
and DNS shown as Picture 5-8.
Picture 5-8
When selecting PPPoE form the Type, user can input user name and password provided by ISP and set
Media and Web port (details please refer to the below Picture 5-9). You can visit your DVR via public network
without port forwarding when network type is set to “PPPoE” and web port is right.
Picture 5-9
[Record CH] options include All, CH-1, CH-2, CH-3, CH-4,
CH-5…CH-16 in turn. Please click the channel you need.
To setup weekly schedules, tick-select the box of the record
status you want (Alarm, General, or No Record) and then click on
each box in the schedule time line that you want this method to
apply to. You can use the [From – To] pull-down menus and Copy
button to copy settings from one day to another day or all days.