Operation Manual
User Manual
19
Picture 5-37
5.2.7.3 Video/Audio Setup
Click [Main MenuSystemVideo/Audio] to enter into Video/Audio setup screen shown as Picture
5-38.
Picture 5-38
5.2.7.4 Language
Picture 5-39
5.2.7.5 System Information
Picture 5-40
5.2.7.6 Maintain
Picture 5-41
Default: Click the [Default] button to reset the DVR parameters to factory default settings.
Enter into [System Language] menu to select the language
you want to use on the DVR (shown as Picture 5-39) and click
[APPLY] button. The selection will be available after system Auto
restarts.
Enter into [Main menuSystemMaintain] menu to reset the
DVR parameters to factory default settings, update system software
(firmware), and set system auto-maintenance shown as Picture 5-41.
Auto Maintain: When opening auto-maintain function, you can
setup system to restart regularly.
System Update: Copy the file named with “dvrupgrade” to U
flash drive; and connects U flash drive to USB port of DVR, and
then click [System upgrade] menu.
System: allow you set Camera system (PAL, NTSC).
Video output: include two options - Live out which indicates
real-time display mode and Spot out which indicates single
channel/dwell time display mode.
Poll time：allow you set poll time between 0s and 300s.
Sequence set: the option allows you setup display position of any
channel (Virtual).
VGA resolution: Your options are 1024×768、1280×1024、1440
×900 and HDMI.
Volume control: allow you set volume’s default value.
Enter into [Click [Main Menu SystemInfo] to preview
system info, including Device name/ID/type/SN, Software
(firmware) version and MAC address etc.