Operation Manual

User Manual
4
2.2 Rear Panel
Ite
m
Physical port Connection method
1
Video input
Connect CH1-16 (Virtual) video input（BNC interface）
2 Video output (UP) Main video output; (Down) Spot output (BNC interface)
3 Audio input Connect CH1-4 audio signal input (BNC interface)
4 Audio output Connect audio signal output, including spot main audio output
and sequence audio output (BNC interface)
5 Audio input Connect (CH5~CH16) Audio input
6 Ethernet: Port Connect LAN, Ethernet (RJ45 interface)
7 Power Switch Turn Power on and off
8 HDMI HDMI Output
9 VGA Port Connect to VGA monitor, such as PC monitor
10 USB Port Connect USB mouse
11 USB Port Connect USB device (Flash Drive, Hard Drive and Recorder etc)
12
RS-485/Sensor/Alarm
RS485/Sensor/Alarm interface (see pin outs below)
13 Power Port Connect power supply - DC12V 5A
List 2-2
RS485/Sensor/Alarm port functions:
Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input according to the
alarm device you purchased.
Alarm output: Connect to the two ports marked with “out”
PTZ Port：Connect your camera to RS-485A and RS485B accordingly.