User Manual
User Manual Contents Safety Instruction............................................................................................................................................................. 1 Chapter 1: DVR Features .............................................................................................................................................. 1 Chapter 2: Layout .............................................................................................................................
User Manual 8.2 Record Alarm setting ......................................................................................................................................... 36 8.3 Mail box server List ........................................................................................................................................... 37 8.4 Troubleshooting .................................................................................................................................................
User Manual Safety Instruction 1. Read Instruction All the safety and operating instruction should be read before the equipment is operated. 2. Power sources This equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your equipment dealer. 3.
User Manual Chapter 1: DVR Features Function Brief and Description Real time monitoring Double video output; with monitor, VGA virtual output port or HDMI Output; Support net-viewer and MP live surveillance, ZOOM IN/OUT, dwell time display and PIP display. Record H.
User Manual Chapter 2: Layout 2.1 Front Panel DVR is a short form of Digital Video Recorder. Front Panel 1 Item Type 1 Key title /Indicator Marks HDD indicator HDD Power indicator PWR Function When the “Red” indicator flashes it means the hard drive is being read or written to. Indicator 2 3 If the “Green” indicator is on the system is getting power normally.
User Manual Front Panel 2 Item Type 1 Key title /Indicator Marks HDD indicator HDD Power indicator PWR Function When the “Red” indicator flashes it means the hard drive is being read or written to. Indicator 2 3 4 5 8 Complex Key Direction Key 9 10 11 normally.
User Manual 2.
User Manual 2.3 Remote Controller Key Title REC SEARCH 2×2 Key Function Press the button to enter into manual record.
User Manual Mouse Operation Except using buttons of front panel or remote controller, you also can use mouse to perform system operation. TYPE Function In menu lock mode, Enter into pop-up menu and clicking any sub menu to pop up Log-in window; on menu unlock mode, enter into pop-up menu, and then clicking left key to enter into any sub menu directly.
User Manual Chapter 4: DVR Start up 4.1 System Initialization After connecting the Power cable of DVR to wall outlet and pressing the Power button on the front panel, you will enter into the system initializing screen shown as Picture 4-1 Picture 4-1 After finishing initialization the system will enter into Live screen. Picture 4-2 is the 16-split display defaulted by system, which is showing no video input status. Once there are video inputs, the screen will display live images from the cameras.
User Manual 5.1 Main Menu Guide Color set Camera Dwell time display Recording Network Search Playback Rec.
User Manual 5.2 Main menu After clicking right button of mouse, pop-up menu appears on the screen. You can click [main menu] option on pop-up menu mode to enter into Main menu interface (Shown as Picture 5-2). In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, Device and System setting etc. Picture 5-2 5.2.1 Display setup Go to [Main menu Camera] to set up the CH name and position for each channel shown as Picture 5-3.
User Manual [Mode] allow you select record modes, including Always and Scheduled. To record 24 hours a day set the [Mode] to Always. To record on motion or a set schedule, select the [Schedule] option When setting [Mode] to Schedule, the schedule screen will appear as shown in Picture 5-6. [Record CH] options include All, CH-1, CH-2, CH-3, CH-4, CH-5…CH-16 in turn. Please click the channel you need.
User Manual At the bottom of the NETWORK SETUP window there is an option to setup a DDNS service of the DVR shown as Picture 5-10.You can access the DVR through a static or dynamic IP address; however a dynamic address can change from time to time. How often depends on your service provider. When it changes you need to go to a website such as www.myipaddress.com from a computer attached to the same router as the DVR to find out what the new IP address is. There are two solutions to this problem.
User Manual Friendly Reminder: The router’s port forwarding interface may be different, however, when entering into virtual server, user will need forward port 0080 and port 9000 of router to IP address of DVR allocated or automatically captured, and select [All] or [Both] in corresponding protocol column and save the above setting. Above steps may differ from the router device depending on the manufacturer. 5.2.
User Manual If you want to backup one history record from the file list, you just select the record and backup device, and then click [Ok] button. Picture 5-14 If you select embedded DVD recorder, backup will be started after clicking [OK] button (shown as below Picture 5-15) When backup processing ends, system will prompt you “Backup success!” shown as Picture 5-16 Picture 5-15 Picture 5-16 When the backup is completed you will be notified. Please click [OK] button to save your backup.
User Manual 5.2.6 Device Management Options in device management include HDD, Alarm, PTZ, Mobile, Motion and Serial set. Click [Main Menu Device Management] option to enter into the window shown as Picture 5-20. Picture 5-20 5.2.6.1 HDD Management In the [Device Management] screen, highlight and click [HDD] icon to enter into the window shown as Picture 5-21.
User Manual Picture 5-23 Picture 5-23（A） Click [Alarm Config] on the bottom of the [Alarm set] window to enter into the interface shown as Picture 5-23(a).Now you are allowed to set detailed alarm parameters. Channel select: the option allows you select one channel you want. I/O Status: allows you select the three options – NO (Normal Open), NC (Normal Close) and OFF.
User Manual On the [EMAIL] screen, when Enabling [Email] option, you can set its parameters shown as Picture 5-25. Picture 5-25 SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using SSL to prevent hackers from monitoring your email or communication info and even your password. Generally Gmail.com server set SSL to [On] shown as Picture 5-25, and other mail server to [Off].
User Manual Picture 5-27 5.2.6.3 PTZ Setup Picture 5-29 Enter into [Main menu Device PTZ Setup] to select the channel you want to control and set PTZ protocol (Pelco-D or Pelco-P), Baud Rate (1200, 2400, 4800, 9600), Stop bit (1, 2), Parity Check (None, Odd, Even Mark Space), Address Code and Cruise status respectively. Please note the above mentioned channel settings must match with the settings of the PTZ camera. 5.2.6.
User Manual The channel is separated into a 13X10 area. When any object moves into the motion detection area, and the area where the object is located is displayed in red recording will be triggered. In the semi-transparent area the motion detection is off. Picture 5-32 5.2.6.6 Set Serial When Multiple DVRs are controlled by keyboard, user needs to set communication protocol. Baud rate: set baud rate of serial protocol Data Bit: Set data bit. Stop Bit: Set stop bit Check: allow you set [Check] to none.
User Manual Picture 5-37 5.2.7.3 Video/Audio Setup Click [Main Menu System Video/Audio] to enter into Video/Audio setup screen shown as Picture 5-38. System: allow you set Camera system (PAL, NTSC). Video output: include two options - Live out which indicates real-time display mode and Spot out which indicates single channel/dwell time display mode. Poll time：allow you set poll time between 0s and 300s. Sequence set: the option allows you setup display position of any channel (Virtual).
User Manual Reboot: Click the [Reboot] button to restart the device manually. Safe power off: the button allows you cut the power after making sure the DVR shutdown. Note: 1、 Please not cut power and unplug U flash disk during the upgrade. 2、 Please manual recover ex-factory default value after restart. 3、 Please return back to live screen and have no any operation after setting auto maintain time, otherwise, the auto-maintenance function will be not effective. 5.
User Manual If in the 16-split mode, the display show as below: Channel (CH1~16) 5.5 PTZ Control We introduced setting PTZ parameters previously in chapter 5.2.6.3. Here we will discuss how to operate PTZ controls. Pop up the Pop-up Menu to highlight and enter into [PTZ control] menu (shown as Picture 5-44). Now user can control the camera with Pan, Tilt and Zoom capabilities.
User Manual 5.6 PIP Mode PIP display is one kind of live display mode, including 1x1 display modes and 1x2 display modes. 1x1 display mode 1x2 display mode 5.7 Video Search Click Pop-up Menu to quickly enter into [Video Search] Menu. We have introduced how to search and playback video record in previous section. Details please refer to section 5.2.4 – Video Search. 5.8 Mute You can control volume open or close by clicking the [Mute] option. 5.
User Manual Picture 6-3 Picture 5-47 3、 Select the playback file you desired from the file shown as Picture 5-48. Picture 5-48 Note: Please select the file with *.264 format or *.nvr. The record file backed-up by U flash disk or removable disk is with *.264 format, and DVD Recorder with *.nvr format. 4、 Open backup file Double-click the record event at the right side to start record file playback.
User Manual The button functions from left to right in turn are as follows: [Play] button: start playing record file [Pause] button: pause the record file playback [Stop] button: stop the record file playback [Rewind] button: rewind playing the record file at X2, X4, X8 and X16 speeds. [Forward] button: forward playing the record file at X2, X4, X8 and X16 speeds. [Frame by frame]: Play the record file frame by frame.
User Manual Chapter 6: Web Application Manager 6.1 Plug-ins download and installation 1. Open your web browser and input the IP address and web port of DVR; 2. If your computer is connected to internet, you will be prompted to download and install “ActiveX Control”; 3. You may have “Windows Security Alert” that attempts to block this with the windows Firewall. In that case, click [Unblock] button to continue your installation processing. 4.
User Manual Picture 6-2 6.3 Web Client Interface After successful logging-in web client, you will enter into the Live interface shown as Picture 6-3 and simultaneously Audio / Video will be automatically connected well. Picture 6-3 6.3.1 Menu Bar Menu bar include [Live], [Playback], [Remote setting], [Local Setting] and [Logout] option and [Language select] option on the upper-right corner. 6.3.1.1 Live screen After PC Web Client logging in, system will be defaulted to enter into Live mode.
User Manual Picture 6-4 Back-up Highlight the backup file you desired and click [Download] button. The backup file will be defaulted to save as AVI format. While double-clicking the record file or highlight the record file and click [Play] button, system will automatically start to backup the record file to specified route while playing the file. 6.3.1.3 Remote setting Click the [Remote setting] option and then enter into the interface shown as Picture 6-5.
User Manual Picture 6-6 Click [Motion] option, you are allowed to set Motion channel, its sensitivity and MD Area, and also copy the settings to other channels. Picture 6-7 Alarm Parameters Click [Alarm Parameters] option to enter into the Device Alarm interface shown as Picture 6-8. Details settings please refer to section 5.2.5.2. Picture 6-8 Click [Channel Alarm] option to enable or disenable I/O alarm, video loss and video cover for each channel (shown as Picture 6-9).
User Manual Picture 6-9 Clicking [Output] option allows you set alarm output parameters, including buzzer time, Post Record time, Alarm out time, and open Pre-record function Picture 6-10 PTZ Parameters Click [PTZ Parameters] option to enter into the interface shown as Picture 6-12. Details settings please refer to section 5.2.5.3.
User Manual Network Parameters Click [Network Parameters] option to enter into [Network setting] menu shown as Picture 6-12. Relevant parameters setting please refer to section 5.2.3 – [Network Setting]. Picture 6-12 Network Environment: The higher quality setting requires higher transfer speed setting. Depending on the actual network environment, the transfer speed may not be achieved, and the local recording speed might be affected by various network bandwidths (Transfer speed) condition.
User Manual Device Manage Extend [Device Manage] option to enter into sub menus – System setting, Authority and DST shown as Picture 6-15. After entering into System setting, you can freely set system Language, TV mode and Time Zone. Picture 6-15 Select [Authority] option and Set user name and password shown as Picture 6-16. Picture 6-16 Select [DST] option to set system DST to “On” or “Off”.
User Manual 6.3.1.4 Local setting The option allows you set [Record Save Path], [Frame Save Path] and [File Save Path]. Picture 6-18 6.3.1.4 Log out Click [Logout] option to return back Log-in Interface shown as Picture 6-2 6.3.2 PTZ Control Picture 6-19 1. PTZ direction control: the buttons allows you control PTZ moving direction. 2. Zoom, Focus and Iris control: the buttons allows you control PTZ moving direction, zoom, focus and iris. Preset bit control 3.
User Manual 6. Load: allow you load the last preset point you set. 7. Save: allow you save the preset point you set. 8. Cruise: allow you enable/disenable the [Cruise] function. 9. Clean: allow you delete the current preset point. 6.3.3 Play Control 1. 2. 3. 4. 5. Picture 6-20 On/Off Live display: clicking the button will open or close Live display. Snapshot: clicking the button will capture the live image from one selected channel and save the image with *.bmp format to PC.
User Manual Chapter 7: Specifications TYPE Video / Audio Video / Audio Record Alarm DEVICE PARAMETER Video System NTSC / PAL(Optional) A/V Compression Format Video: H.264 Display Resolution D1:704×576(PAL) 704×480 (NTSC) Record Resolution D1/HD1/CIF Record Total Frame rate PAL：100 fps @D1, 200 fps @HD1, 400 fps @CIF NTSC：120 fps @D1, 240 fps @HD1, 480 fps @CIF Video System NTSC / PAL(Optional) Record Mode Always, Scheduled, motion, Alarm, Net-viewer record.
User Manual Chapter 8: Appendix 8.1 Operation Function Table Type Title Page Set system date/time, display format and day-light saving time 26 Set system language 27 Channel setting Set CH title and position; adjust image color parameter value; set CH display to ON / Off and time display/recording time overlaying to On/Off. 9 Record setting Set image quality, resolution, volume, record mode an pack time 10 Record search Time based search, channel based search and rec. mode based search.
User Manual Remote record Set record mode and status of DVR remotely 32 Remote playback Check local record history via network 32 PTZ control Remotely control PTZ camera, position, focus, zoom and iris etc.
User Manual screen that means a motion alarm is triggered. When [ ] icon appears on the screen, that means HDD alarm has occurred. 8.3 Mail box server List Web site Mail box Sender server（25） Receiver server（110） @163.com smtp.163.com pop3.163.com @vip.163.com smtp.vip.163.com pop.vip.163.com @188.com smtp.188.com pop.188.com @126.com smtp.126.com pop3.126.com @netease.com smtp.netease.com pop.netease.com @yeah.net smtp.yeah.net pop.netease.com @qq.com smtp.qq.com pop.qq.com smtp.
User Manual 6. Q: “Record” Can not work normally, how to deal with? A: Check if the current screen is in Play mode, pressing [Stop] button to exit the Play mode and then you can enter into the [Record] function. 7. Q: Why the Remote Controller can’t work normally? A: Check if the battery is power off; or check if the Remote Controller is broken. 8. Q: Can we records whilst playing-back? A: Yeah, you can do it. The system support you records whilst playing-back. 9.
User Manual The material in this document is the intellectual property of our department . No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our department prior written permission. Our products are under continual improvement and we reserve the right to make changes without noti ce. But no guarantee is given as to the correctness of its contents. We do not undertake any responsibility for the harms cause by using our product.
