Operation Manual

HD-TVI DVR User Manual
13
Fig 4-6 Live Configuration

Live
② A software keyboard will pop up by clicking camera name area. Click the letters and (or)
digital numbers on the keyboard to input the name you want to display in live image.
③ Checkmark the camera name in the show name area.
④ All channels will show the camera name by checking “All” checkbox.
⑤ Click “Apply” to save the setting.
4.2.2 Main Monitor
The main monitor settings allow you to set camera sequence in live display mode.
Operate the following steps to set main monitor:
① Go to MenuSetupLive Main Monitor interface. Refer to Fig 4-7.
Fig 4-7 Live Configuration-Main Monitor
② Select display mode and channel.
③ Select dwell time. Click button to set up the previous channel groups of dwell
picture. Click
button to set the latter channel groups of dwell picture.
④ Click “Apply” to save the setting.
4.2.3 Mask
If there is something you don’t want to display in the live image. You can set mask. For a