Operation Manual

HD-TVI DVR User Manual
14
given channel a maximum of three areas can be masked.
To set up mask area:
① Go to MenuSetupLive Mask interface.
Fig 4-8 Live Configuration-Mask
② Click Setting button to go into live image.
③ Press and drag the left mouse button to set mask area as shown below.
④ Right click to exit the mask setting interface.
⑤ Click Apply button to save the setting.
To delete mask area
① Click Setting button in the mask interface.
② Select a certain masked area and double click to delete that masked area.
③ Then click Apply button to save the setting.
Fig 4-9 Setting Mask Area
4.3 Record Configuration
Record configuration includes six sub menus: enable, record bit rate, time, recycle record,
stamp and snap.
Before Configuration, please make sure your DVR has been installed with HDD and has
completed its initialization.