Operation Manual

HD-TVI DVR User Manual

② Select fps, resolution, quality, encode and max bit rate

③ Select “All” to set the same settings for all channels.

4.6.3 Email

To set up Email:

① Go to MenuSetup NetworkEmail interface. Refer to Fig 4-24.

Fig 4-24 Network Configuration-Email

② Set SMTP Server and port.

SMTP Server/Port: The name and port number of SMTP server. You can set up SSL

check (such as Gmail) according to actual needs.

③ Set sender’s address and password.

④

Set receiver’s email address and click “Test” button to test the validity of the mailbox.

Attaching image: If selected, the system will attach images when sending emails.

4.6.4 Server

This function is mainly used for connecting ECMS/NVMS. The setting steps are as follows:

① In the server interface, select “Enable” as shown in the Fig 4-25.

② Check the IP address and port of the transfer media server in the ECMS/NVMS. The

default server port for auto report is 2009. If it is modified, please go into the transfer

media interface to check.

Parameter

Meaning

FPS

Range from: 1-25.

Resolution

Support CIF.

Quality

The quality of the clients’ image. The higher the value is, the clearer the

record image. Six options: lowest, lower, low, medium, higher and highest.

Encode

VBR and CBR.

Max bit rate

Range from: 256~1792kbps.