Operation Manual

HD-TVI DVR User Manual

Fig 4-31 P.T.Z Configuration-Serial Port

② Select “Enable” and set up the value of address, baud rate and protocol according to the

settings of the speed dome.

③ Select “All” to set the same settings for all channels.

Advanced settings include preset setting, cruise setting and track setting.

Go to MenuSetup P.T.Z Advanced. Refer to Fig 4-32.

Fig 4-32 P.T.Z configuration-advanced

To set up preset:

Parameter

Meaning

Address

The address of the PTZ device.

Baud rate

Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400,

4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.

Protocol

Communication protocol of the PTZ device. Range from: NULL,

PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP,

VISCA, SAMSUNG, RM110, HY, N-control.

Simulative

Cruise

If enabled, no matter whether the PTZ device supports cruise or not, the

presets will cruise.