Owner manual

ManualsBrandsMonarch Instrument ManualsEquipmentACT-3

Safeguards and Precautions

1. Read and follow all instructions in this manual carefully, and

retain this manual for future reference.

2. Do not use this instrument in any manner inconsistent with

these operating instructions or under any conditions that

exceed the environmental specifications stated.

3. Be sure the power supplied to this instrument matches the

specification indicated on the rear panel.

4. Be sure all AC power is removed before making or removing

any connections to or from this instrument.

5. This instrument is not user serviceable. For technical

assistance, contact the sales organization from which you

purchased the product or Monarch Instrument directly.

TABLE OF CONTENTS

1.0 GENERAL OVERVIEW ............................................................................... 1

1.1 Modes of Operation ......................................................................... 1

1.1.1 RPM Mode ............................................................................ 1

1.1.2 Frequency Mode ................................................................... 1

1.1.3 Scale Mode (Ratemeter) ....................................................... 1

1.1.4 SECAP (Single Event Capture) Mode .................................... 1

1.1.5 Rate of Change (ROC) Mode ................................................. 1

1.1.6 Totalizing Mode ..................................................................... 2

1.2 Decimal Point .................................................................................. 2

1.2.1 Auto Ranging ........................................................................ 3

1.2.2 Fixed Decimal Point .............................................................. 3

1.3 Limits (Alarms) ................................................................................. 3

1.3.1 Latching vs. Non-Latching Limits ........................................... 3

1.3.2 Hysteresis ............................................................................ 3

1.3.3 Low Limit Lockout ................................................................. 4

1.4 Current (IO) and Analog (AO) Output ............................................. 4

1.5 Maximum and Minimum................................................................. 4

Measurement Mode Button Overview

SET RESET

∧∨

RECALL

Reset

Alarms

View

Lim 1

View

Lim 2

Show

Max/Min

SET RESET

∧∨

RECALL

Menu Mode

SET RESET

∧∨

RECALLSET RESET

∧∨

RECALLSET RESET

∧∨

RECALLSET RESET

∧∨

RECALLSET RESET

∧∨

RECALL

SET RESET

∧∨

RECALL

Edit Lim 1

SET RESET

∧∨

RECALL

Edit Lim 2

SET RESET

∧∨

RECALL

Reset Max / Min