Manual

Safeguards and Precautions
1. Read and follow all instructions in this manual carefully, and retain
this manual for future reference.
2. Do not use this instrument in any manner inconsistent with these
operating instructions or under any conditions that exceed the
environmental specifications stated.
3. This instrument is not user serviceable. For technical assistance,
contact the sales organization from which you purchased the
product or Monarch Instrument directly.
In order to comply with EU Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE): This product may contain material which
could be hazardous to human health and the environment. DO NOT
DISPOSE of this product as unsorted municipal waste. This product needs
to be RECYCLED in accordance with local regulations, contact your local
authorities for more information. This product may be returnable to your
distributor for recycling - contact the distributor for details.
Monarch Instrument’s Limited Warranty applies. See www.monarchinstrument.com
for details.
Warranty Registration and Extended Warranty coverage available online at
www.monarchinstrument.com.
EXAMINER 1000 SPECIFICATIONS
Vibration Sensor: Piezoelectric accelerometer 100 mV/g with magnetic base,
probe and 5 foot cable to BNC
Display: LCD 3.5 digit , measurement, hold, low battery indicator
Measurement Acceleration 0.01-19.99 g (RMS)
Range: Velocity 0.01-19.99 in/sec., 0.1-199.9 mm/sec (RMS)
Envelope 0.01-19.99 ge (peak)
Frequency Range: Overall 10 Hz - 10 kHz
Envelope 0.5 kHz-10 kHz
Output: Sensor Excitation: 18 Vdc @ 2 mA (BNC)
Audio Out: 3.5 mm mini plug; 250 mW into 8 ohms, 150 mW
into 32 ohms; Adjustable volume control with off position
Power: (2) “AA” cells
Operating Time: 20 hours continuous without headphones
Weight: Instrument: 7 oz. (0.19 kg); Complete Kit: 2.85 lb (1.30 kg)
Dimensions: 6.3 x 3.3 x 1.25” (152 x 83 x 32 mm)
Operating conditions: -14° to 122°F (-10° to 50°C)
Use the chart below as a guide to judge the overall vibration severity of your equipment.
Refer to page 12 for further details.
VIBRATION SEVERITY PER ISO 10816-1
Vibration Velocity Vrms
Machine Class I Class II Class III Class IV
small medium large rigid large soft
in/s mm/s machines machines foundation foundation
0.01 0.28
0.02 0.45
0.03 0.71
0.04 1.12
0.07 1.80
0.11 2.80
0.18 4.50
0.28 7.10
0.44 11.2
0.71 18.0
1.10 28.0
1.77 45.0
good
satisfactory
unsatisfactory
unacceptable
16