Manual

ManualsBrandsMonarch Instrument ManualsSensorsSLS-115/230

SLS-115/230

Smart Laser Sensor

MONARCH INSTRUMENT

Instruction Manual

15 Columbia Drive

Amherst, NH 03031-2334 USA

Phone: (603) 883-3390

Fax: (603) 886-3300

E-mail: support@monarchinstrument.com

Website: www.monarchinstrument.com

Printed in the U.S.A.

1071-4859-111

CE DECLARATION OF CONFORMITY

As Manufacturer:

Monarch Instrument

Division of Monarch International Inc.

15 Columbia Drive, Amherst NH 03031 USA

declares under Monarch’s sole responsibility that the product:

to which this declaration relates is in conformity with the following directives and

standards when installed and operated in accordance with the user manual:

References: Retlif Testing Laboratories, (Report No. R-4283)

Technical Construction File SLS-0604 of June 2004

SLS - Smart Laser Sensor

June 2004

Manufacturer (Amherst,NH) Alan Woolfson, VP Engineering (Authorized Signature)

Directives: EMC 89/336/EEC

Low Voltage 73/23/EEC

Standards: EMC: EN61326:1997

Electrical Safety: IEC61010-1:2001

Laser Safety: IEC60825-1:2001

Summary of content (8 pages)

PAGE 1
CE DECLARATION OF CONFORMITY MONARCH INSTRUMENT Instruction Manual As Manufacturer: Monarch Instrument Division of Monarch International Inc.
PAGE 2
SAFEGUARDS AND PRECAUTIONS Examples: 1234.56 123456. _ _ _ _0.0 ( _ = space character) 10.0 CHARGING WARNING - This product emits a visible beam of laser light. Avoid exposure to the laser radiation. The use of optical viewing aids (binoculars, for example) may increase the ocular hazard. Slide the Power switch (8) to the Off/Charge position and plug in the charger. The Power LED (4) will blink red while the unit is fast charging. The Power LED will blink amber when slow (trickle) charging.
PAGE 3
To change the setting, move the Polarity switch (5) to the left (positive pulse) for a white target or to the right (negative pulse) for a black target. Turn the Sensitivity Adjust knob (7) to Max. Press and hold the Learn/ Gain button (6) until the Auto/Gain LED (3) blinks. 8.0 AIMING THE LASER The proper operation of the Laser Sensor is dependent upon the alignment to and reflectivity of the target.
PAGE 4
1.0 SMART LASER SENSOR SPECIFICATIONS Laser Specifications: Classification: Class 3R (per IEC 60825-1 Ed 1.2 2001-8) Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001. Maximum Laser Output: Pulse Duration: Laser Wavelength: Beam Divergence: Beam Diameter: Laser Diode Life: 3mW Continuous 650 nm < 0.5 mrad 4 x 7 mm typical at 2 meters 8,000 hours MTBF (1 year warranty) Laser is on when this indicator is illuminated.
PAGE 5
6.0 OPERATION Note: Refer to Figure 3 for switch and button locations. Turn the unit on by moving the Power switch (8) to the On position. The unit may be operated from the internal batteries and/or the charger/power supply. The internal batteries will be trickle charged when using the AC charger/power supply. To turn the unit off, slide the Power switch (8) to the Off/Charge position. If the charger is plugged in, the batteries will charge.
PAGE 6
Pulse Output (continued): Polarity: RS232: Positive or Negative pulse (switch selectable) Transmit Out – ASCII value of RPM (Accuracy ± 0.002% of reading) The output socket on the unit has the following connections: Pin 1 Settings: 9600 baud, 8 bits, 1 stop, No Parity 2 3 Connector: Circular DIN 5 Socket - Common, (Outputs) SO, OC, (Serial RS232) Transmit, Receive 4 Dimensions: 5.38" (13.67cm) L (including snout) x 2.53" (6.42cm) W x 2.25" (5.
PAGE 7
4.5 4.6 4.7 If after completing step 4.4, the On Target LED (1) blinks erratically or not at all, rotate the Sensitivity Adjust knob (7) slowly from 1 to 9 until the LED blinks regularly or is on solid. Weight: Compliance: CE 93/68/EEC EMC directive (EN 61326:2001) IEC 61010-1 2001, IEC 60825-1 2001, CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated July 26, 2001 If after completing steps 4.1-4.5, the On Target LED (1) blinks erratically or not at all: 4.6.
PAGE 8
3.0 INDICATORS AND SWITCHES 5 1 Charge position: 6 Blinks AMBER when slow charging. Steady AMBER when the batteries are fully charged. 2 7 5. Polarity switch 6. Learn/Gain button 3 4 Figure 3 Smart Laser Sensor 8 1. On Target LED Lit whenever the sensor is receiving a reflected signal back from the target. As the frequency increases, it will be on solid unless the measured frequency is not stable. This is useful in setting up the unit. 2. Laser On LED Blinks when unit is first turned on.