Printer User Manual

Within a Format

When you define the graphic field within your format, the row and

column parameters represent where on the format to place the

graphic image.

If you are doing a compliance label, these numbers are usually

0,0, because your compliance label covers the entire supply. See

"Placing the Graphic in a Format," for a sample compliance label.

If you are placing a graphic (a

logo, for example) within a

certain area on your supply,

enter the starting position

(bottom left corner) of the

graphic image.

This label shows the triangle

"logo" beginning (the bottom left

corner) at 400,75 as defined in

the graphic field.

Defining the Graphic Header

Every graphic packet must contain a graphic header. This is the

first thing you enter. It identifies and provides important

measurement and formatting information for the graphic. Bitmap,

duplicate, next-bitmap, constant text, line, and box fields follow

the graphic header, if they are used.

Syntax

{G,graphID,action,device,units,row,col,

mode,"name"

G1. G Graphic Header.

G2. graphID Unique number from 0 to 999 (0 to 99 for 9403) to identify the

graphic image.

Creating Graphics

5-13