Printer User Manual

"Reconfiguring Memory" for more information. If the
error message persists, call Technical Support.
Machine Faults
These errors occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
Press ENTER or ESCAPE/CLEAR, depending on your
printer. If the error continues to appear, change the
supply.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected.
For errors 751-753, Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
Press ENTER or ESCAPE/CLEAR, depending on your
printer and try to continue printing. If the error
continues to appear, change the supply.
8-20
Diagnostics and Errors