Printer User Manual

L7. thickness Using the chart below for reference, write the desired line
thickness (
1
to
99
) in box
L7
. Measured in dots.
NOTE:
Line thickness fills upward on horizontal lines, or to
the right on vertical lines.
L8. "pattern" Line pattern. Enter
""
.
Example
L,S,110,30,110,150,10,"" p
Defines a horizontal line field as a segment starting at row 110,
column 30 and ending at row 110, column 150. The line
thickness is 10 dots.
Defining Box Fields
Use boxes to form borders or highlight items of interest. Define
each box field separately. This field is not assigned a field
number, but is counted as a field (keep this in mind, as the printer
allows a maximum of
1000
fields or
100
for 9403 printer per
format). You can define any line length and a thickness up to 99
dots, as long as the solid black print does not exceed 30 percent
of any given square inch of the label.
Defining Fields
3-27