Printer User Manual

If you do not use the optional parameters, the syntax for the
online configuration packets does not change. For example,
{I,C,0,50,0,0,0
p
}
uses the default contrast, moves print 50 dots (0.25) inches
closer to the bottom of the supply and does not change the
margin adjustment, prints at the default print speed, and uses the
default printhead width.
Example
{
I
,0,U,N
p
}
Uploads the printer configuration from nonvolatile RAM and
returns the following to the host.
A,0,0,0,0,0
p
B,2,1,0,0,0
p
C,0,0,0,0,0,0
p
D,1,0,2
p
E,"~123~044~034~124~125~126","","~013~010"
p
F,3,1,0,0,1
p
G,0,65,65
p
M,R,8725,1345,N,2535,615
p
M,R,R,300
p
M,T,R,20
p
M,I,R,3300
p
M,D,N,1280
p
M,F,N,640
p
M,V,R,3740
p
The parameters for each packet (A-M) are displayed. In the first
line that begins with M, 8725 is the total volatile memory
available, 1345 is the memory used in volatile RAM. 2535 is the
total non-volatile memory available, 615 is the memory used in
non-volatile RAM. The remaining lines beginning with M list the
buffer sizes in 1/10K for the Receive, Transmit, Image,
Downloadable Fonts, Formats, and Scalable Fonts Buffers. DIP
switch settings will not be displayed. Refer to your Operator’s
Handbook for information about DIP Switches.
Configuring the Printer
2-9