User manual

• Tabletop Printer/Encoder
• Encodes HF (13.56 MHz)
RFID Chips
• Prints Bar Code Data
• Thermal Direct or Transfer
• On-demand or Continuous
• Prints Up to 12 ips
• Optional 300 dpi Printing
Monarch
®
9855
™
HF
High Frequency RFID
Printer/Encoder
Product Specification
STANDARD FEATURES
Dimensions:
Height - 13.0" (330 mm)
Width - 12.5" (318 mm)
Depth - 17.3" (439 mm)
Weight - 34 lbs. (15.5 kg)
Printing Method:
Thermal Direct or Thermal Transfer
Printhead:
4.0" (102 mm/812 dots)
203 dots/inch (8 dots/mm) OR
300 dots/inch (11.8 dots/mm)
Both printheads provide enhanced print quality
Processor:
32-Bit 150 MHz Processor
RFID Encoding Frequency:
High Frequency (HF) 13.56 HHz
RFID Protocols:
ISO 15693-2, -3
ISO 18000-3
TI Tag-IT
Philips/NXP I-Code
TAGSYS C270, C370
Memory:
4 MB Flash, 16 MB SDRAM
Optional 16 MB; Configurable 8 MB
RAM using these buffers:
Transmit, Receive, Image, Format, Downloadable &
Scalable Fonts
Bar Code Types:
UPCA +2/+5, UPCE +2/+5, EAN8 +2/+5, EAN13
+2/+5, Interleaved 2 of 5, Extended Code 39, Codabar
(NW7), Code 128, Code 93, MSI, PDF417, Postnet,
MaxiCode, Code 16K, Quick Response (QR Code)
Standard Fonts:
Bitmap - Standard, Reduced, Bold, OCRA-like, CG
Triumvirate, and CG Triumvirate Bold
TrueType® - EFF Swiss Bold
Supports downloaded double-byte (TrueType and
bitmap) fonts, allowing for Chinese, Japanese, and
Korean character sets.
Font Magnification:
1x to 7x
4 to 250 pt. for scalable/TrueType fonts
PC/Host Interface:
IEEE-1284 Parallel or Centronics Mode
USB (Universal Serial Bus)
RS 232 Serial at 2,400 BPS to 115,200 BPS
Optional Ethernet, 802.11B wireless card.
Printer Warranty:
One (1) year parts and labor.
Full written warranty statement available on request.
Printhead Warranty:
One (1) million inches or six (6) months, whichever
occurs first.
Optional Knife Warranty:
500,000 cuts or one (1) year, whichever occurs first.
PERFORMANCE
Power Source:
90-264 VAC with autoselect 50/60 Hz
Optional 24 VDC regulator
Print Speed:
2.5 ips (64 mm) - default for serial bar codes
4 ips (102 mm) - 203 dpi serial bar codes with narrow
elements of 3 dots (or greater)
6.0 ips (152 mm) - default for parallel bar codes
8.0 ips (203 mm)
10.0 ips (254 mm)
12.0 ips (305 mm) only with 203 dpi printhead.
Member o
f