INSTRUCTION MANUAL ENCLOSED SKU: BAAA003BU / BAAA003GY / BAAA003KK ATTENTION IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL OR CALL CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
SIDE TABLE SIDE TABLE ASSEMBLY INSTRUCTION Part PARTS LIST Description PARTS Quantity A B C Table Feet Table Top Table Rack 4 1 1 HARDWARE D E F Washers Bolts M6*15 mm Allen Key 5 12 12 1
PLEASE READ AND FOLLOW ALL SAFETY TIPS ***Tips: Do not fasten all bolts completely tight until finish all steps. 1. Locate 4 Table Feet(A) to the Table Top(B) by the pre-drilled threads. Fasten Bolts(E) with Washers(D) by using Allen Key(F) to combine table top and table feet together. 8 bolts should be fastened totally, 2 for each foot. (Step 1) 2. Locate Table Rack(C) to 4 Table Feet(A) by the pre-drilled threads.
INSTRUCTION MANUAL ENCLOSED FOR ONE OF THE TWO CHAIRS ATTENTION IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL OR CALL CUSTOMER SERVICE BEFORE YOU RETURN THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
SWIVEL CHAIR BSI0019 SWIVEL CHAIR ASSEMBLY INSTRUCTION Part PARTS LIST Description PARTS A B C D E F Right Armrest Left Armrest Chair Seat Chair Back Rocking Track Swivel Chair Base Quantity 1 1 1 1 1 1 HARDWARE H I K L M Bolts M6 *40mm Washers Screw Nuts Allen Key Hex Spanner 18 18 8 1 1
PLEASE READ AND FOLLOW ALL SAFETY TIPS PL ***Tips: Do not fasten all bolts completely tight until finish all steps. 1. Locate the Armrests(A & B) to the Chair Back(D) by the pre-drilled threads. Fasten Bolts(H) with Washers (I) by using Allen Key(L) to combine armrests and chair back together. 4 bolts should be fastened totally.
2.Locate the Chair Seat(C) to the Armrests(A & B) by the pre-drilled threads. Fasten Bolts(H) with Washers (I) by using Allen Key(L) to combine armrests and chair seat together. 4 bolts should be fastened totally. (Step 2) 3.Locate the Chair Seat(C) to the Chair Back(D) by the pre-drilled threads. Fasten Bolts(H) with Washers (I) by using Allen Key(L) to combine chair seat and chair back together. 2 bolts should be fastened totally. (Step 3).
4. Locate the Rocking Track(E) to the Armrests’ bottom(A & B) by the pre-drilled threads. Fasten Bolts(H) into Screw Nuts(K) by using Allen Key(L) and Hex Spanner(M) to combine rocking rack and the chair main part together. 4 bolts should be fastened totally. (Step 4). 5.Locate the Rocking Track(F) to the Rocking Rack(E) by the pre-drilled threads. Fasten Bolts(H) with Washers (I) into Screw Nuts(K) by using Allen Key(L) and Hex Spanner(M). 4 bolts should be fastened totally.
