ASSEMBLY INSTRUCTIONS RATTAN HANGING PORCH SWING NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS WF285005AAD WF285005AAK
F F E A D B C Notice: 1. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. 2. Place the item on a flat ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5. If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again. 6.
Part List A B Right Frame (1pc) D C Left Frame (1pc) E Back Frame (1pc) Seat Frame (1pc) F Seat Cushion (1pc) Pillow (2pcs) Hardware List 2 1 Bolt M6x40mm 14 pcs + extra 2 pcs 4 3 W6x1 Washers 14 pcs + extra 2 pcs 5 Safety keychain (4pcs) Allen key M4 (1 pc) 3 Steel chain (2pcs)
STEP 1 Connect Right frame (A), & Seat frame (C) with Bolt (1) & Washers (2) A C 1 1 1 STEP 2 Connect Part from STEP 1 & Left frame (B) with Bolt (1) & Washers (2) B 1 1 1 4
STEP 3 Connect Part from STEP 2 & Back frame (D) with Bolt (1) & Washers (2) 1 1 1 1 D STEP 4 Connect the parts of the Back frame (D) & Right frame (A) and Left frame (B) completed in STEP 3 with Bolts (1) & Washers (2) A D 1 1 B 1 1 5
STEP 5 Connect Part from STEP 4 with Steel chain (3) & Safety keychain (4) 3 3 4 3 4 4 3 4 4 4 6
STEP 6 Put on Seat cushion (E) & Pillow (F) to complete Rattan Hanging Porch Swing F F E Finished 7