User Manual

73D0024
37
KHLDV Series Gas Fireplace



• Easy Access Function Operation and System Configuration
• Operation Confirmation/Fault Diagnostic Indications (LED/
Buzzer)
• ON/OFF/HI/Low Operation

• Electronic Ignition
• Pilot Lockout safety feature
• Electric Power Regeneration from Thermopile to save
battery
• 6-hour Automatic Shut Down Option
• Convenient NG/LP Gas Type Conversion
• Standing Pilot/Intermittent pilot Conversion
• Previous settings Restoration Ability
• Uninterrupted Operation During Power Outage (Automatic
Battery Backup)
• ON/OFF RF Remote Receiver
• Optional Transmitter Learn Capability

• Easy Snap-on Design
• Embedded Compact 120 V AC Adapter with Auto Battery
Back up Feature
• Remote Controlled Blower, Lighting, and Auxiliary AC Outputs
 
Three Flame Height Settings X
Low battery Indication for Transmitter X
Child Proof Lock-out X
LCD Backlight X
Security Codes X
Thermostatic Control Mode X
Three Brightness Settings for Lights X
Three Speed Control for Blower X
On/Off Rear Burner Control X
Programmable Timer to turn blower on and off X

The Command Center uses four (4) "AA" batteries.

1. Press down the battery door tabs and pull out to remove battery door.
2. Install the batteries as indicated on Command Center.
3. Close battery door by snapping in place.
4. When the four (4) batteries are installed the system is ready for use.
5. The batteries should be replaced when the LED indicates low battery.
FP1917
Signature components
8/08
RF Receiver
ON/OFF
NG/LP
Conversion
To Thermopile
To Sensor
To Sparker
To Command Center
To Stepper Motor
To Valve
Battery Door
Master Switch
ON
LED
OFF




Figure 47 -
Signature Command System Components
AC Module