Operator`s manual
21
Saw Chain
5. Check tension often during operation, especially
during the first half-hour. If chain loosens: stop, let
chain cool, and readjust tension.
HOW TO LUBRICATE YOUR CHAIN
▲ Each time you fill your gas tank,
fill your oil reservoir with clean
bar-and-chain oil.
■ Be sure your chain, bar, and sprocket are always
receiving oil from the saw during operation.
Never put used oil, or old motor oil, in your saw or
on your chain.
▲
Before the first use,
soak the chain overnight
to allow oil to penetrate all
chain components.
Basic Lubrication Tasks
▲
Before use
■
Often
●
Daily ◆ Weekly
Never
25436_Txt_2005.qxd 9/20/2004 12:15 PM Page 21