Operator`s manual

ManualsBrandsMonet ManualsComputer equipmentPC5220

ose

90 or 95)

nd 3/8")

91)

Bar

Mount

A218

A318

A041

A061

A064

A074

A095

D009

D176

(Etc.)

**T041

**T061

**T074

**T095

**T218

**T318

Guide Bars

Nose Size

Sprocket-nose Bars

Nose Nose-sprocket

Pitch Tooth Count

A = 1/4" = 10

B = .325" = 10, 11, or 12

D = 3/8" = 9, 10, or 11

E = 3/8" = 7 or 9 (3/8" low profile

“90” or “91” chains only)

F = .404" = 10 or 11

G = .325" = 12

H = 3/8" = 11

Solid-nose Laser Tip and Laser-Lite™ Bars

Nose Radius

X = Extra Small (.95")

S = Small (1.12")

M = Medium (1.33")

L = Large (1.65")

Oregon

bar part numbers are printed on the bar package, and

have 10 digits. Here’s what each digit means:

• The first two digits tell the bar’s length.

• The third digit tells the bar’s groove width or “gauge.”

• The fourth and fifth digits tell the bar’s type.

• The sixth digit tells either: (a) the nose pitch and nose-sprocket

tooth count of any sprocket-nose bar – or – (b) the nose radius of

any solid-nose Laser Tip or Laser-Lite

™

bar.

• The last four digits identify the bar mount pattern.

Bars with “T” mounts have the Intenz

™

tensioning feature

20 = 20" bar length

8 = .058"gauge

RN = Power Match

Symmetrical

D = 3/8" nose pitch with a 9-, 10-, or 11-tooth nose sprocket

D009 = Bar mount, fits certain models of several brands

W BAR PART-NUMBERING SYSTEM WORKS

N D D009

25436_Txt_2005.qxd 9/24/2004 2:28 PM Page 75