Operation Manual

12
Power Button:
Press the Power Button to activate the robot. The button will light up blue. The power button light indicates the
status of the robot and its system.
Power button Light
Red LED blinking
Blue LED blinking
Solid Blue
System Status
Battery Level is low
The battery is recharging
The battery is fully recharged
Control Panel
1. Start / Stop Button:
Press this button and it will light up blue. The robot is activated to perform the cleaning cycle. Press the button
again to stop the cleaning cycle.
2. Timer
Different cleaning time Settings options are available. Users may use their remote control to enter specific
cleaning time settings. (e.g. 10 mins, 20 mins, … 80mins etc. ) the selected setting will be shown on the display.
When the robot is activated the default cleaning time setting is last previous time set.
Downloaded from www.Manualslib.com manuals search engine