Ver 1.1 Robot Cleaner ಽᅨℎᗭʑ ᔍᬊᖅᕽ User Manual ME770 Series Thank robot cleaner. Thank you you for for purchasing purchasing the yourME770 robot series cleaner. Before please please read this User carefully, and keep for future Before using using the yourproduct, robot cleaner, read thisManual User Manual carefully, anditkeep it for reference. future reference.
Robot Cleaner User Manual ME770 Series ಽᅨℎᗭʑ ᔍᬊᖅᕽ ᔍᬊ⦹ʑ ᱥᨱ ၹऽ ᅙ ᔍᬊᖅᕽෝ ᯞᨕᵝŁ ᔍᬊ ᵲ ᨙᱽࠥ ᅝ ᙹ ᯩࠥಾ ᅕš⧕ ᵝᖙ ᱽ⣩ ༉ߙᨱ ᔍᬊᖅᕽ ԕᬊᯕ ݅ෝ ᙹ ᯩᮝ໑ ᩩŁ ᨧᯕ ᄡĞࢁ ᙹ ᯩ ݅ܩ
Features Smart Vision Mapping The Smart Vision Mapping Technology is capable of mapping out the surrounding area and accurately tracking its previous location to further cover the unclean areas. Deep Cleaning Pattern Performs Vertical pattern overlapped by the horizontal pattern. It enables to get 2 times of cleaning result at the same area. The factory default is set to Deep Cleaning Pattern in Hybrid/ Vacuum/ Mop/ Shadow Cleaning modes.
High Performance BLDC Motor 82mm The cleaning performance is excellent due to the powerful BLDC (suction) motor. The BLDC motor is 30% more powerful than a DC motor, and the lifetime is approximately 10 times as long (estimated: 5,000 hours). Various Cleaning Modes The various cleaning modes provide different cleaning functions and levels of performance, which are optimized for the user environment and purpose.
Contents Before Use Installing Product Operation Features 02 Safety Information Maintenance Language Setting 36 05 Cleaning the Dust Bin 37 What’s in the Box 10 Cleaning the Dust Filter 38 Overview 11 Cleaning Sensors and Wheels 39 Cleaning the Dust Inlet 40 Installing the Charger 14 Using and Managing the Battery 41 Installing the Side Brushes 15 Voice Guidance 44 Remote Control 16 Error Message Description 45 Charging 17 Installing the Water Supply Big Mop Kit 18 Tro
Before Use Safety Information Please read and follow the instructions in this manual to ensure your safety and the safe use of your robot cleaner. Safety symbols In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt you and/or damage your robot vacuum cleaner. You may be killed or seriously injured if you do not follow this instruction.
Robot Cleaner Install the charger in a location that can be easily accessed by the robot cleaner. ● If you install the charger in a corner or if there are many obstacles around the charger, it may prevent the robot cleaner from automatically charging. Make sure that the charger is always plugged into a power source. ● If no power is supplied to the charger, you will not be able to use the automatic charge function. When you use Do not use the power adaptor with another appliance.
Before Use Do not use the robot cleaner in a place where the temperature is too low or too high (lower than -5°C and higher than 35°C). ● This may cause damage to the product. Do not use the robot cleaner when the dust bin is completely filled up. ● This may reduce the suction power. Never use the robot cleaner without the filters. ● Doing so may cause a malfunction of the robot cleaner.
Robot Cleaner Do not touch the plug or wall socket with wet hands. ● Doing so may cause electric shock. If you spill water into the robot cleaner, unplug the power cord and allow the unit to dry completely before use. ● Water can bring the risk of fire and electrical shock. ● Immediately remove the power cord from the outlet and contact your service center. Do not use chargers other than the charger that came with your robot cleaner.
Before Use Please clean the robot cleaner after turning it off. ● If you clean it when the power is on or it is operating, it may cause injury. Clean the main brush, dust bin, dust filter, and dust inlet periodically. ● If you use the robot cleaner for a long time without cleaning it, there is the risk of malfunction and damage. Copyright and instructions ● Copyright © 2015 EVERYBOT Inc. All rights reserved. ● Published May 18, 2015.
Robot Cleaner What’s in the Box Charger Power adaptor Power cord Remote control (including two AAA batteries) Ver 1.1 Ver 1.1 Robo Staubsauge t Cleaner rrobo Robot netto ter Robot aspira yeur polve 1.
Before Use Overview Robot Cleaner 2 ㅣTopㅣ 1 3 4 ㅣRearㅣ 6 7 8 1 Control buttons and indicators 2 Dust bin cover 3 Bumper 4 O bstacle and signal detection sensors 5 9 ㅣBottomㅣ 5 Air outlet 10 6 Adaptor jack 7 Power switch 13 12 8 Signal receiving sensor 11 12 9 Cliff detection sensors 9 9 10 Charging terminals 11 11 11 Wheels 14 15 12 Side brush installation pins 13 Dust inlet 14 Main brush 15 Mop plate installation holes 11
Robot Cleaner Control Buttons and Indicators 1 Start/stop button 11 10 9 8 2 Power button 7 3 Cleaning mode selection button 4 Battery level indicator 5 Double Cleaning Option indicator 12 6 5 4 13 14 15 6 Threshold Option indicator 7 Turbo mode indicator 8 Timer (every day) indicator 9 Timer (1 hour) indicator 10 Charging mode indicator 11 Shadow Cleaning mode indicator 1 2 3 12 Intensive Cleaning mode indicator 13 Mop Cleaning mode indicator 14 Vacuum Cleaning mode indicator 15 Hybrid Clea
Before Use Remote control You can conveniently access the various functions of the robot cleaner with your remote control. ● ● F unctions that can be controlled through the control panel on the robot cleaner: Hybrid cleaning, Vacuum cleaning, Mop cleaning, Intensive cleaning, Shadow cleaning, and Charging.
Robot Cleaner Installing the Charger 1 ● Connect the power adaptor. ● S et the robot cleaner detection distance (5 m or 8 m). ● P lace the power adaptor in the holder of the charger. 2 ● Check the power connection (blue lamp). 3 ● C heck the location of the charger. -C lear all obstacles in the area within 1 m in front, left, and right of the charger.
Installing Installing the Side Brushes ● ● C heck for the L mark under the side brush. A lign with the L mark under the robot cleaner and install the L brush. ● ● C heck for the R mark under the side brush. A lign with the R mark under the robot cleaner and install the R brush.
Robot Cleaner Remote Control Install the battery into the remote control. ▶ Make sure to properly orient the + and – poles of the batteries when inserting the battery. ▶ If you insert batteries incorrectly, there is a risk of fire or damage to the remote control. - Be careful if you use non-standard 1.5V batteries, as this may cause damage to the product and its function. - If your battery has had a leakage, immediately replace it.
Installing Charging If you have prepared the charger, main body, and remote control, you must then charge the battery of the robot cleaner to use it. To charge the robot cleaner, follow these steps: 1 ● 2 ● Turn the power switch on. Hold the robot cleaner with both hands and put it on the charger. -M atch the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner Installing the Water Supply Big Mop Kit 1 ● 3 ● 2 S upply water into the mop plate and attach the mop to it. If you apply excessive force to the mop plate when you install it on the robot cleaner, the joint parts of the mop plate may be damaged. ● F lip it over and turn the system power switch on. 18 T urn the power switch off (on the lower rear side of the robot cleaner). A ttach the mop plate. Fit the joint parts well to the holes of the robot cleaner.
Installing ▶ After cleaning, remove the mop plate from the robot cleaner and the mop from the mop plate. ▶ Remove water in the mop plate and let the cover open to dry the mop plate. ▶ Wash and dry the mop for the next use. ▶ You may use the included cleaning brush for cleaning the mop more thoroughly.
Robot Cleaner Before You Start Check the following before you start the robot cleaner. 1 Be careful not to break the robot cleaner when you pull the robot cleaner out of the box. For information of installing the robot cleaner, see page 14. 2 Check the location (L/R) of the brushes and install them. For information on installing the brushes, see page 15. 3 Pull the robot cleaner out and manually charge it first.
Product Operation Starting & Stopping Cleaning Starting Cleaning 1 ● Turn the power switch on. 2 3 or 4 ● or If you are cleaning an area that is difficult to clean using auto cleaning mode, change to the proper cleaning mode. Stopping Cleaning After cleaning, the robot cleaner returns to the charger or stops on the spot according to the cleaning mode. If you press the Start/stop (▶/▒ ) button when the robot cleaner is operating, the cleaning will be stopped.
Robot Cleaner Changing the Cleaning Mode User can set the cleaning mode to match the cleaning environment.
Product Operation How to Recharge the Battery Auto Charging When the robot cleaner has finished cleaning, it returns to the charger. ● If the battery is low and the battery indicator is blinking rapidly, the robot cleaner will stop cleaning and return to the charger to charge. ● Manual Charging ● Hold the robot cleaner with both hands and put it on the charger. ● Match the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner Hybrid Cleaning In Hybrid Cleaning, the robot cleaner performs the Vacuum Cleaning and Mop Cleaning at the same time. Hybrid Cleaning offers a comprehensive floor care solution because of the use of the twin side brushes, the main brush, the BLDC suction, and the reusable microfiber Big Mop with the Water Supply Tank all together. The Hybrid Cleaning is recommended for comprehensive cleaning on your hard floors.
Product Operation Vacuum Cleaning Vacuum cleaning is used where the needs are vacuum suction only without mop cleaning. It can be used on hard floor or carpet. 1 ● 2 Turn the system power switch on. ● Turn the main power button on. or 3 or 4 ▶ While in Vacuum Cleaning mode, you can also select Turbo option, Double Cleaning option and Threshold (climb over) option. To select these options, please refer to the pages that reference each.
Robot Cleaner Mop Cleaning Mop Cleaning mode is used for when you need mopping only without vacuuming. ▶ If Mop Cleaning mode is used on carpet or rug, the carpet or rug can be ▶ For Big Mop with Water Supply Tank, we recommend moistening the damaged. Therefore, please use the Mop Cleaning mode only on hard floor. Sweep Pattern Big Mop before attaching it for longer wet cleaning performance. 1 ● Follow the directions on page 18 to attach the Big Mop with the Water Supply Tank.
Product Operation Other Cleaning Modes and Options Cleaning Mode Function For Where How to Select Select Intensive with the Mode Heavy Dust button on the Control Panel or press Particles or Heavy the Intensive button on the remote Traffic Area control Intensive Clean in 1m x 1m area where the robot cleaner located. Shadow Clean in the hard to reach areas.
Robot Cleaner Intensive Cleaning The robot cleaner intensively cleans the surrounding area relative to its current location. 1 ● 2 Turn the power switch on. or 3 or 4 28 ▶ In Auto Cleaning mode, the robot cleaner stops on the spot after it has finished the cleaning. ▶ In the area in which there are many obstacles, the robot cleaner may not operate in normal cleaning modes.
Product Operation Shadow Cleaning You can clean under your bed or furniture. ▶ To use shadow cleaning mode, turn the room light on. In a dark room, the robot cleaner can’t detect the space under the bed or furniture. ▶ The robot cleaner moves to a place under the bed or furniture to start shadow cleaning. To reduce the time spent moving through the room, put the robot cleaner in front of the bed or furniture under which you want to perform shadow cleaning. 1 ● Turn the power switch on.
Robot Cleaner Corner Cleaning The robot cleaner runs along the walls of the current place where it is. If the robot cleaner takes a turn around the walls or detects the signal of the charger twice, it will finish cleaning. 1 ● Turn the power switch on. 2 or 3 4 ▶ 30 If the robot cleaner finishes cleaning, it will return to the charger.
Product Operation Manual Cleaning You can control the robot cleaner directly using the remote control. 1 ● S top the robot cleaner that is operating by pressing the Start/stop (▶/▒) button. or 2 ● Press the Manual button on the remote control. -A ir suction will start in its current place. - I f you press the Manual button again, air suction will be stopped. 3 ● y pressing direction keys on the remote control, you can B move the robot cleaner where you want it to go.
Robot Cleaner Scheduled Cleaning (Reservation Cleaning) You can schedule the robot cleaner to start cleaning after 1 hour, or at the same time every day. ▶ ▶ Before scheduling, you must install the charger. - You can only set the cleaning schedule using your remote control. - If the robot cleaner is charging at the scheduled time, it will start the cleaning after finishing the charging.
Product Operation Turbo Option While you are using the Hybrid / Vacuum / Intensive / Shadow / Manual Cleaning, by pressing the Turbo button on the remote controller you can control suction power. ▶ Turbo option is not available in Hybrid Cleaning mode and Mop Cleaning mode. or Power off Power on Threshold Option For less than a 1cm threshold height of threshold or carpet, rug and etc, the user is able to choose threshold climbing over 1 ON/OFF option by the remote control.
Robot Cleaner Double Deep Cleaning Option The Double Deep Cleaning Option performs 2 cleaning sessions of the vertical pattern overlapped by the horizontal pattern. Deep Cleaning Pattern Vertical pattern overlapped by the horizontal pattern ▶ 1 ● Double Deep Cleaning Option Performs 2 cleaning sessions of the vertical pattern overlapped by the horizontal pattern. The factory default is set to Deep Cleaning Pattern in Hybrid / Vacuum / Mop / Shadow Cleaning modes. Turn the system power switch on.
Product Operation 3 ● S elect any one of Hybrid / Vacuum / Mop / Shadow Cleaning. To learn how to select these options, you may refer to the relevant sections on the User Manual. or 4 ● or Press the Double CL button on the remote control. The Double Deep Cleaning Option indicator is now turned on. or 5 ● The robot cleaner will perform 2 cleaning sessions of the vertical pattern overlapped by the horizontal pattern.
Robot Cleaner Language Setting ▶ You can select a language for voice guidance from the ones available in the system. 1 2 Press and hold the Mode button, and then turn the power switch on. Turn the power switch off. 3 Keep pressing the Start/stop button until you have reached the language you desire. Whenever you press the Start/stop button, you will hear the following sentence in a different language. - “Starting automatic cleaning.” - “Cleaning is canceled.
Maintenance Cleaning the Dust Bin 1 2 Remove the dust bin cover. Remove the dust bin. 3 4 Empty the dust bin. Remove the dust filter. 5 6 Replace the dust bin in the robot cleaner. Replace the dust filter. ▶ 7 M ake sure to follow the directions carefully when installing the dust bin. Click ▶ o clean the dust filter and determine its lifetime, T see page 38. Replace the dust bin cover.
Robot Cleaner Cleaning the Dust Filter ▶ ▶ The dust filter can be easily cleaned by gently scraping off the surface or compressed air. - The dust filter is reusable. - It is recommended not to clean with water. We recommend that you clean the dust filter whenever the bin is more than 2/3 full. - ▶ If you do not clean the dust filter, the suction power of the robot cleaner can be reduced. Replace the dust filter if you notice a tear or a hole.
Maintenance Cleaning Sensors and Wheels Cleaning Sensors ● C lean (blow or wipe) the three sensors with the included cleaning brush or a cotton swab. - I f sensors are severely contaminated, wipe with a moistened cotton swab. - D o not wipe directly with water, and do not use benzene or alcohol to clean sensors. Cleaning Wheels ● C lean wheels using the brush. - T o clean the front wheel, remove the screws and remove the wheel, and clean it with the brush.
Robot Cleaner Cleaning the Dust Inlet 2 1 Remove the dust inlet cover. 3 Remove the main brush. 4 Clean the removed main brush with the cleaning brush. 5 To reinstall the dust inlet cover, insert the 2 tips to the matching holes on the robot cleaner. 40 Check the groove’s shape and insert the main brush into the fixing hole, and then secure the wing of the fixing pin to the fixing pin.
Maintenance Using and Managing the Battery The battery is a consumable item. The more you use the battery, the shorter the battery’s lifetime. Battery Lifetime ● We guarantee 6 months of use in a normal environment. ● Always charge the battery for the best use experience. ● The battery lifetime may vary depending on the use environment. Charging Battery ● If you are using the robot cleaner for the first time, please fully charge the battery first.
Robot Cleaner Battery Replacement ● I f you notice that the operating time has been significantly reduced, you may need to replace the battery. ● You must use a battery that is manufactured by Moneual. ● Remove the battery from the robot cleaner when the system power is off. ● ● D ispose of your old batteries according to the local laws and regulations of your region. To purchase an extra battery, please contact our customer service.
Maintenance 4 Install the new battery and connect the battery cable connector. Replace the battery cover and tighten with four screws. Battery Handling and Safety Information ● I f you leave the fully discharged battery for a long time, the battery may become damaged and you may not be able to use it. ● If you use a battery other than Moneual’s for use with the robot cleaner or the battery may be damaged. ● Remove the battery before disposing of the robot cleaner.
Robot Cleaner Voice Guidance Following voices are the basic voice list. Depending on your model, some contents of these voices may differ from the actual voices. Voice Guidance Starting Corner Cleaning. The robot cleaner will start Corner Cleaning. Starting Intensive Cleaning. The robot cleaner will start Intensive Cleaning. Starting Pre-set Cleaning. The robot cleaner will start the Scheduled Cleaning. Starting Shadow Cleaning. The robot cleaner will start Shadow Cleaning. Cleaning is completed.
Maintenance Error Message Description ▶ ▶ ▶ he cleaner will display combination of numbers and icons to inform users of what the issue is. T Using the information below, it is important to resolve the issue first as pressing any button will clear the error message. If the problem has not been solved with one of the solutions below, please contact your customer service. he error voice guidance comes only one time when the error has occurred.
Robot Cleaner Cause You operated the robot cleaner without the dust bin. Voice Dust bin is missing. Solution Cause Both main wheels have been lifted. Voice Please place the cleaner on the floor. Solution Put the robot cleaner on the floor or move it to another place. Cause Escape rough road mode continually occurred in excess of the limit while moving. Voice Please check the front wheel. Solution Remove obstacles from the front caster and empty the dust bin.
Customer Support Troubleshooting Problem Solution The robot cleaner does not work. ①T urn off the power switch on the lower-rear side. ②C heck the battery. Charge the battery in the charger. The robot cleaner does not charge. ①R emove any obstacles around the charger. ②C heck if the power cord is connected to the charger. ③T urn on the power switch at the rear of the charger. → If you charge the robot cleaner forcedly, it may not be charged. The remote control does not work.
Robot Cleaner Specifications Robot Cleaner Model Dimensions Weight Speed Operating Noise Power Consumption Battery Dust Bin Capacity Charging Time Operating Time ME770 348 mm (Diameter) x 85 mm (Height) 3.064 kg Cleaning mode: 32 cm/sec., Driving mode: 30 cm/sec. - Max. 68 dB (1400 mAh battery) - Max. 70 dB (2800 mAh battery) - Max. 20 W (1400 mAh battery) - Max. 25 W (2800 mAh battery) Lithium iron phosphate (LiFePO4) 12.
Product Warranty The warranty service we provide to our consumers is based on the customer compensation regulation. If you request warranty service, EVERYBOT will provide the service. The company will notify the customer of whether he or she will be compensated and the details of the compensation within seven (7) business days after the day of the customer’s request, and offer the compensation within fourteen (14) business days after the day of notification.
ಽᅨℎᗭʑ ᔍᬊᖅᕽ ၹऽ ᅙ ᔍᬊᖅᕽෝ ᯞᨕᵝŁ ᔍᬊ ᵲ ᨙᱽࠥ ᅝ ᙹ ᯩࠥಾ ᅕš⧕ ᵝᖙ ᔍᬊᖅᕽ ԕᬊᯕ ݅ෝ ᙹ ᯩᮝ໑ ᩩŁ ᨧᯕ ᄡĞࢁ ᙹ ᯩ ݅ܩ
Customer Service info@moneual.eu Before you call for service, please be ready to provide the following information: • Model name • A description of your problem • Phone no. & address ಽᅨℎᗭʑ ᔍᬊᖅᕽ ᔍᬊ⦹ʑ ᱥᨱ ၹऽ ᅙ ᔍᬊᖅᕽෝ ᯞᨕᵝŁ ᔍᬊ ᵲ ᨙᱽࠥ ᅝ ᙹ ᯩࠥಾ ᅕš⧕ ᵝᖙ ᱽ⣩ ༉ߙᨱ ᔍᬊᖅᕽ ԕᬊᯕ ݅ෝ ᙹ ᯩᮝ໑ ᩩŁ ᨧᯕ ᄡĞࢁ ᙹ ᯩ ݅ܩ www.moneual.
