Operation Manual

10 ENGLISH
1-3. Rear panel
1. Space for power supply
2. Thumbscrew: These thumbscrews secure the top cover to the chassis.
3. Motherboard I/O shield hole:
Space for I/O port from motherboard
4. Air vent:
Space for air flow-out. It causes system failure if you block this air vent.
5. PCI bracket:
Remove bracket gently when you install graphics card or PC peripherals.
6. RGB terminal:
This cable is connected to the RGB port of the graphics card. This is used for
LCD touch screen display.
NOTE
Dual display graphics card should be used for LCD touch screen