Operation Manual

ENGLISH 23
It is not possible to install ODD of which the depth is over 170mm.
Be sure to check the ODD specification before purchasing ODD.
2-12. Attaching ODD Bezel
Tape
1. After completion of Case assembly turn the power on and eject ODD
2. Remove the tape on the back side of ODD bezel provided as an accessory
part.
3. Align ODD bezel and tray and attach the ODD bezel to ODD tray
Remove the original ODD bezel before installing ODD and attach the ODD bezel provided
as an accessory part.
If it is difficult to remove the original ODD bezel, consult to the maker or seller of ODD