Operation Manual

20 ENGLISH
2-7. Cable Connection
Figure... Front Panel Inside View
Table... Front Panel Inside View
A. S.W B/D
B. Front I/O B/D
C. Card Reader
D. 7" LCD Module
E. 10key B/D
F. Vol. Knob B/D
G. IR Receiver
2-8. Power S.W and LED Connection
1. Connect the S.W B/D's Power S.W cable to the iMON LCD's Power In 2Pin.
2. Connect the iMON LCD's Power out 2Pin cable to the front port of the motherboard with the
Power S.W pin.
3. Connect the S.W B/D's LED cable with the MotherBoard's front port LED Pin.
* Refer to the manual that came with the MotherBoard for more information on the front ports.
* Make sure that all connections are made in the correct direction.
Motherboard LED Port
2Pin or 3Pin
Motherboard Power
Port