Ver 1.0 Robot Cleaner Quick Start Guide MR6800M-M3** Series Downloaded from www.Manualslib.
What’s in the Box 1 What’s in the Box 2 3 1 Robot cleaner (1400mA built-in battery) 2 Charger 3 Power adaptor 4 Power cord 5 Remote control (included two AAA batteries) 4 5 6 Side brushes (1 set) 7 Cleaning brush 8 User manual Quick start guide 9 Water-supply big mop kit 6 7 8 9 Downloaded from www.Manualslib.
Overview 2 1 9 3 4 6 7 8 13 12 10 11 9 9 11 11 14 15 5 Robot cleaner 1 Control buttons and indicators 2 Dust bin cover 3 Bumper 4 Obstacle and signal detection sensors 5 Air outlet 6 Adaptor jack 7 Power switch 8 Signal receiving sensor 9 Cliff detection sensors 10 Charging terminals 11 Wheels 12 Side brush installation pins 13 Dust inlet 14 Main brush 15 Mop plate installation holes 5 6 4 Charger 1 1 Power/charging lamp 2 Guide signal transmission sensor 2 3
Control buttons and indicators 9 8 7 10 1 Start/stop button 2 Power button 3 Cleaning mode selection 11 12 13 6 5 4 1 2 button 4 Turbo mode indicator 5 Shadow cleaning mode indicator 6 Auto cleaning mode indicator 7 Mop cleaning mode indicator 8 Timer (one time) indicator 9 Timer (every day) indicator 10 Room selection indicator 11 Error indicator 12 Charging mode 3 indicator 13 Battery level indicator Remote control 1 Power button Press to turn the power on/off.
Installing Installing the Side Brushes Check for the L mark under the side brush. Þ Align with the L mark under the robot cleaner and install the L brush. Þ Check for the R mark under the side brush. Þ Align with the R mark under the robot cleaner and install the R brush. Þ Installing the Charger 1 Connect the power adaptor. Þ Set the robot cleaner detection distance (5 m or 8 m). Þ Place the power adaptor in the holder of the charger.
Cleaning Modes Auto Cleaning ǘ It is the normal cleaning mode. 1 Turn the power switch on. Þ 2 3 4 or or Intensive Cleaning ǘThe robot cleaner intensively cleans the surrounding area relative to its current location. 1 Turn the power switch on. Þ 2 3 4 or Ě In the area in which there are many obstacles, the robot cleaner may not operate in normal cleaning modes. Corner Cleaning ǘ The robot cleaner runs along the walls of the current place where it is. 1 Turn the power switch on.
Shadow Cleaning ǘ You can clean under your bed or furniture. 1 Turn the power switch on. Þ 2 Þ Put the robot cleaner in front of a bed or furniture. Ě To use shadow cleaning mode, turn the room light on. In a dark room, the robot cleaner can’t detect the space under the bed or furniture. 4 3 5 or or Manual Cleaning ǘYou can control the robot cleaner directly using the remote control. 1 Stop the robot cleaner that is operating by pressing the Start/stop(Ě Ħ) button.
Mop Cleaning ǘ In mop cleaning mode, the robot cleaner can completely remove fine dust on the floor. 1 4 Supply water into the mop plate and attach the mop to it. Þ Turn the power switch on. Þ 2 Turn the power switch off. Þ 3 Attach the mop plate. Ě If you apply excessive force to the Þ mop plate when you install it on the robot cleaner, the joint parts of the mop plate may be damaged.
