Ver 1.0 Robot Cleaner User Manual MR6800M Series Thank you for purchasing the MR6800M series robot cleaner. Before using the product, please read this User Manual carefully, and keep it for future reference. Depending on your model, some contents of this User Manual may differ from the actual product. The contents of this User Manual are subject to change without notice. Downloaded from www.Manualslib.
Downloaded from www.Manualslib.
Robot Cleaner User Manual MR6800M Series Downloaded from www.Manualslib.
'FBUVSFT .PQ DMFBOJOH NPEF Utilizing the attachable full sized mop, the mop cleaning mode is optimized for cleaning even the finest dusts that are harmful to health. 4IBEPX DMFBOJOH NPEF This is a function that enables you to clean area where the light does not reach. In Shadow Cleaning mode, you can intensively clean areas under the bed, sofa, etc. that are difficult to clean with a conventional vacuum cleaner.
XJO TJEF CSVTIFT Twin side brushes, installed on the left and right sides of the bottom, completely clean the corners that are difficult to clean with the vacuum suction system alone. &DP GSJFOEMZ MJUIJVN JSPO QIPTQIBUF CBUUFSZ The appliance uses an eco-friendly battery that does not contain any heavy metals or acids that are harmful to the human body.
$POUFOUT #FGPSF 6TF *OTUBMMJOH 1SPEVDU 0QFSBUJPO Features 02 Language setting 34 Safety Information 05 Cleaning the Dust Bin 35 What’s in the Box 10 Cleaning and Replacing the Dust Filter 36 Overview 11 Cleaning Sensors and Wheels 37 Cleaning the Dust Inlet 38 Using and Managing the Battery 39 Voice Guidance 42 Error Message Description 43 Troubleshooting 45 Specifications 46 Installing the Charger 14 Installing the
Before Use 4BGFUZ *OGPSNBUJPO Please read and follow the instructions in this manual to ensure your safety and the safe use of your robot cleaner. 4BGFUZ TZNCPMT In this manual, various Warnings, Cautions and Notes are provided to help you to avoid potential hazards that can hurt you and/or damage your robot vacuum cleaner. You may be killed or seriously injured if you do not follow this instruction.
Robot Cleaner *OTUBMM UIF DIBSHFS JO B MPDBUJPO UIBU DBO CF FBTJMZ BDDFTTFE CZ UIF SPCPU DMFBOFS Þ If you install the charger in a corner or if there are many obstacles around the charger, it may prevent the robot cleaner from automatically charging. .BLF TVSF UIBU UIF DIBSHFS JT BMXBZT QMVHHFE JOUP B QPXFS TPVSDF Þ If no power is supplied to the charger, you will not be able to use the automatic charge function.
Before Use %P OPU VTF UIF SPCPU DMFBOFS JO B QMBDF XIFSF UIF UFNQFSBUVSF JT UPP MPX PS UPP IJHI MPXFS UIBO ¡$ BOE IJHIFS UIBO ¡$ Þ This may cause damage to the product. %P OPU VTF UIF SPCPU DMFBOFS XIFO UIF EVTU CJO JT DPNQMFUFMZ öMMFE VQ Þ This may reduce the suction power. /FWFS VTF UIF SPCPU DMFBOFS XJUIPVU UIF öMUFST Þ Doing so may cause a malfunction of the robot cleaner.
Robot Cleaner %P OPU UPVDI UIF QMVH PS XBMM TPDLFU XJUI XFU IBOET Þ Doing so may cause electric shock. *G ZPV TQJMM XBUFS JOUP UIF SPCPU DMFBOFS VOQMVH UIF QPXFS DPSE BOE BMMPX UIF VOJU UP ESZ DPNQMFUFMZ CFGPSF VTF Þ Water can bring the risk of fire and electrical shock. Þ Immediately remove the power cord from the outlet and contact your service center.
Before Use 1MFBTF DMFBO UIF SPCPU DMFBOFS BGUFS UVSOJOH JU Pò Þ If you clean it when the power is on or it is operating, it may cause injury. $MFBO UIF NBJO CSVTI EVTU CJO EVTU öMUFS BOE EVTU JOMFU QFSJPEJDBMMZ Þ If you use the robot cleaner for a long time without cleaning it, there is the risk of malfunction and damage. $PQZSJHIU BOE JOTUSVDUJPOT Þ Copyright © 2013 MONEUAL Inc. All rights reserved. Þ Published August 30, 2013.
Robot Cleaner 8IBU T JO UIF #PY Charger Power adaptor Power cord Remote control (included two AAA batteries) Side brushes (1 set) Cleaning brush User manual Quick start guide Robot cleaner (1400mA built-in battery) .PQ LJUT Different mop kits are supplied with different models. .JDSPöCFS NPQ LJU %JTQPTBCMF TXFFQJOH DMPUI LJU #JH NPQ LJU 8BUFS TVQQMZ CJH NPQ LJU 1. Mop plate for a microfiber mop 2. Microfiber mop 1. Mop plate for disposable sweeping cloths 2. Disposable sweeping cloths 1.
Before Use 0WFSWJFX 3PCPU DMFBOFS ǘTopǘ ǘRearǘ Control buttons and indicators Dust bin cover Bumper Obstacle and signal detection sensors Air outlet Adaptor jack Power switch ǘBottomǘ Signal receiving sensor Cliff detection sensors Charging terminals Wheels Side brush installation pins Dust inlet Main brush Mop plate installation holes 11 Downloaded from www.Manualslib.
Robot Cleaner $POUSPM CVUUPOT BOE JOEJDBUPST Start/stop button Power button Cleaning mode selection button Turbo mode indicator Shadow cleaning mode indicator Auto cleaning mode indicator Mop cleaning mode indicator Timer (one time) indicator Timer (every day) indicator Room selection indicator Error indicator Charging mode indicator Battery level indicator $IBSHFS ǘFrontǘ ǘBackǘ Power/charging lamp Guide signal
Before Use 3FNPUF DPOUSPM You can conveniently access the various functions of the robot cleaner with your remote control. Functions that can be controlled through the control panel on the robot cleaner: auto cleaning, shadow cleaning, mop cleaning, and charging.
Robot Cleaner *OTUBMMJOH UIF $IBSHFS Connect the power adaptor. Þ Set the robot cleaner detection distance (5 m or 8 m). Þ Place the power adaptor in the holder of the charger. Þ Þ Þ Check the power connection (blue lamp). Check the location of the charger.
Installing *OTUBMMJOH UIF 4JEF #SVTIFT Check for the L mark under the side brush. Check for the R mark under the side brush. Þ Align with the L mark under the robot cleaner and install the L brush. Þ Þ Align with the R mark under the robot cleaner and install the R brush. Þ 15 Downloaded from www.Manualslib.
Robot Cleaner *OTUBMMJOH UIF .PQ Depending on which mop kit is included with your robot cleaner, the way you install it will be different. Please refer to the appropriate section to check how to install the kit. Ě %JòFSFOU NPQ LJUT BSF TVQQMJFE XJUI EJòFSFOU NPEFMT .JDSPöCFS NPQ LJU Ě 5IF NJDSPöCFS NPQ LJU JT POMZ TVQQMJFE XJUI UIF GPMMPXJOH NPEFM MR6800M-M0** Þ Þ Attach the mop to the mop plate. Turn the power switch off (on the lower rear side of the robot cleaner).
Installing %JTQPTBCMF TXFFQJOH DMPUI LJU Ě .PEFMT UIBU JODMVEF UIF EJTQPTBCMF TXFFQJOH DMPUI LJU MR6800M-M1** MR6800M-M4** MR6800M-M5** You can clean by attaching the disposable sweeping cloth that can be purchased separately in stores. Þ Þ Attach a sweeping cloth to the mop plate. Turn the power switch off (on the lower rear side of the robot cleaner). Þ Attach the mop plate. Fit the joint parts well to the holes of the robot cleaner.
Robot Cleaner #JH NPQ LJU Ě .PEFMT UIBU JODMVEF UIF CJH NPQ LJU MR6800M-M2** MR6800M-M4** MR6800M-M6** Þ Þ Attach the mop to the mop plate. Turn the power switch off (on the lower rear side of the robot cleaner). Þ Attach the mop plate. Fit the joint parts well to the holes of the robot cleaner.
Installing 8BUFS TVQQMZ CJH NPQ LJU Ě .PEFMT UIBU JODMVEF UIF XBUFS TVQQMZ CJH NPQ LJU MR6800M-M3** MR6800M-M5** MR6800M-M6** Þ Þ Supply water into the mop plate and attach the mop to it. Turn the power switch off (on the lower rear side of the robot cleaner). Þ Attach the mop plate. Fit the joint parts well to the holes of the robot cleaner.
Robot Cleaner 3FNPUF $POUSPM Install the battery into the remote control. Ě .BLF TVSF UP QSPQFSMZ PSJFOU UIF BOE o QPMFT PG UIF CBUUFSJFT XIFO JOTFSUJOH UIF CBUUFSZ Ě *G ZPV JOTFSU CBUUFSJFT JODPSSFDUMZ UIFSF JT B SJTL PG öSF PS EBNBHF UP UIF SFNPUF DPOUSPM Be careful if you use non-standard 1.5V batteries, as this may cause damage to the product and its function. If your battery has had a leakage, immediately replace it.
Installing $IBSHJOH If you have prepared the charger, main body, and remote control, you must then charge the battery of the robot cleaner to use it. To charge the robot cleaner, follow these steps: Þ Þ Turn the power switch on. Hold the robot cleaner with both hands and put it on the charger. Match the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner #FGPSF :PV 4UBSU Check the following before you start the robot cleaner. #F DBSFGVM OPU UP CSFBL UIF SPCPU DMFBOFS XIFO ZPV QVMM UIF SPCPU DMFBOFS PVU PG UIF CPY For information of installing the robot cleaner, see page 14. $IFDL UIF MPDBUJPO - 3 PG UIF CSVTIFT BOE JOTUBMM UIFN For information on installing the brushes, see page 15.
Product Operation 4UBSUJOH 4UPQQJOH $MFBOJOH 4UBSUJOH DMFBOJOH Turn the power switch on. Þ or or If you are cleaning an area that is difficult to clean using auto cleaning mode, change to the proper cleaning mode. Þ 4UPQQJOH DMFBOJOH After cleaning, the robot cleaner returns to the charger or stops on the spot according to the cleaning mode. If you press the 4UBSU TUPQ (ⶺ Ħ ) button when the robot cleaner is operating, the cleaning will be stopped. or 23 Downloaded from www.
Robot Cleaner $IBOHJOH UIF DMFBOJOH NPEF User can set the cleaning mode to match the cleaning environment. Cleaning modes that you can select using the .PEF .
Product Operation )PX UP 3FDIBSHF UIF #BUUFSZ "VUP DIBSHJOH W hen the robot cleaner has finished cleaning, it returns to the charger. Þ If the battery is low and the battery indicator is blinking rapidly, the robot cleaner will stop cleaning and return to the charger to charge. Þ .BOVBM DIBSHJOH H old the robot cleaner with both hands and put it on the charger. Þ M atch the terminals of the robot cleaner with the terminals of the charger.
Robot Cleaner "VUP $MFBOJOH It is the normal cleaning mode. The robot cleaner cleans all spaces are open. Turn the power switch on. Þ or or Ě "GUFS DMFBOJOH UIF SPCPU DMFBOFS SFUVSOT UP UIF DIBSHFS Ě *G ZPV QSFTT UIF 4UBSU TUPQ Ě Ħ CVUUPO XIFO UIF SPCPU DMFBOFS JT PQFSBUJOH UIF DMFBOJOH XJMM CF TUPQQFE If you press the 4UBSU TUPQ (Ě Ħ ) button when the robot cleaner stops, it will start the cleaning again.
Product Operation *OUFOTJWF $MFBOJOH The robot cleaner intensively cleans the surrounding area relative to its current location. Turn the power switch on. Þ or Ě *O "VUP DMFBOJOH NPEF UIF SPCPU DMFBOFS TUPQT PO UIF TQPU BGUFS JU IBT öOJTIFE UIF DMFBOJOH Ě *O UIF BSFB JO XIJDI UIFSF BSF NBOZ PCTUBDMFT UIF SPCPU DMFBOFS NBZ OPU PQFSBUF JO OPSNBM DMFBOJOH NPEFT 27 Downloaded from www.Manualslib.
Robot Cleaner $PSOFS $MFBOJOH The robot cleaner runs along the walls of the current place where it is. If the robot cleaner takes a turn around the walls or detects the signal of the charger twice, it will finish cleaning. Turn the power switch on. Þ or Ě *G UIF SPCPU DMFBOFS öOJTIFT DMFBOJOH 28 Downloaded from www.Manualslib.
Product Operation 4IBEPX $MFBOJOH You can clean under your bed or furniture. Ě 5P VTF TIBEPX DMFBOJOH NPEF UVSO UIF SPPN MJHIU PO *O B EBSL SPPN UIF SPCPU DMFBOFS DBO U EFUFDU UIF TQBDF VOEFS UIF CFE PS GVSOJUVSF Ě 5IF SPCPU DMFBOFS NPWFT UP B QMBDF VOEFS UIF CFE PS GVSOJUVSF UP TUBSU TIBEPX DMFBOJOH 5P SFEVDF UIF UJNF TQFOU NPWJOH UISPVHI UIF SPPN QVU UIF SPCPU DMFBOFS JO GSPOU PG UIF CFE PS GVSOJUVSF VOEFS XIJDI ZPV XBOU UP QFSGPSN TIBEPX DMFBOJOH Turn the power switch on.
Robot Cleaner .PQ $MFBOJOH In mop cleaning mode, the robot cleaner can completely remove fine dust on the floor. Þ Þ Ě *O NPQ DMFBOJOH NPEF UIF SPCPU DMFBOFS EPFT OPU QFSGPSN UIF WBDVVN DMFBOJOH Ě *O NPQ DMFBOJOH NPEF UIF SPCPU DMFBOFS EPFT OPU NPWF UP UIF DBSQFU QBE PS UISFTIPME For information on attaching the mop plate to the robot cleaner, see page 16. Turn the power switch on. or or 30 Downloaded from www.Manualslib.
Product Operation "VUP NPQ DMFBOJOH NPEF In auto mop cleaning mode, the robot cleaner runs the mop cleaning in the following patterns, without performing vacuum cleaning. Wave mode Tornado mode Zigzag mode 4FMFDUJOH UIF NPQ DMFBOJOH NPEF You can select the mop cleaning mode by pressing the .PEF . button when it is cleaning in mop cleaning mode. or The mode will be changed as follows: Auto mode Wave mode Tornado mode Zigzag mode Auto mode 31 Downloaded from www.Manualslib.
Robot Cleaner .BOVBM $MFBOJOH You can control the robot cleaner directly using the remote control. Stop the robot cleaner that is operating by pressing the 4UBSU TUPQ (Ě Ħ) button. Þ or Press the ."/6"- button on the remote control. Þ Air suction will start in its current place. If you press the ."/6"- button again, air suction will be stopped. By pressing direction keys on the remote control, you can move the robot cleaner where you want it to go.
Product Operation 4DIFEVMFE $MFBOJOH You can schedule the robot cleaner to start cleaning after 1 hour, or at the same time every day. Ě #FGPSF TDIFEVMJOH You If ZPV NVTU JOTUBMM UIF DIBSHFS can only set the cleaning schedule using your remote control. the robot cleaner is charging at the scheduled time, it will start the cleaning after finishing the charging.
Robot Cleaner Language Setting Ě You can select a language for voice guidance from the ones available in the system. Ě If the robot cleaner is operating, press the Start/stop (Ě Ħ) button to stop it and press the Power button to turn it off. 1 2 First, turn the power switch on. Then press and hold the Mode button for 2~3 seconds until the display appears with a beep sound. Turn the power switch off. 3 4 The following message will be played in the selected language. ˈStarting automatic cleaning.
Maintenance $MFBOJOH UIF %VTU #JO Remove the dust bin cover. Remove the dust bin. Empty the dust bin. Remove the dust filter. Replace the dust filter. Replace the dust bin in the robot cleaner. Ě Make sure to follow the directions carefully when installing the dust bin. Click Ě 5P DMFBO UIF EVTU öMUFS BOE EFUFSNJOF JUT MJGFUJNF TFF QBHF Replace the dust bin cover. 35 Downloaded from www.Manualslib.
Robot Cleaner $MFBOJOH BOE 3FQMBDJOH UIF %VTU 'JMUFS Ě 3FNPWF UIF EVTU öMUFS BOE DMFBO JU CZ CMPXJOH UIF EVTU Pò Ě 5IF EVTU öMUFS DBO CF FBTJMZ DMFBOFE CZ HFOUMZ TDSBQJOH Pò UIF TVSGBDF PS DPNQSFTTFE BJS 5IF EVTU öMUFS JT SFVTBCMF CVU BOZ DPOUBDU XJUI XBUFS DBO SFEVDF UIF MJGFUJNF We recommend that you clean the dust filter if the bin is more than 2/3 full. If you do not clean the dust filter, the suction power of the robot cleaner can be reduced.
Maintenance $MFBOJOH 4FOTPST BOE 8IFFMT $MFBOJOH TFOTPST Clean (blow or wipe) the three sensors with the included cleaning brush or a cotton swab. Þ If sensors are severely contaminated, wipe with a moistened cotton swab. Do not wipe directly with water, and do not use benzene or alcohol to clean sensors. $MFBOJOH XIFFMT Clean wheels using the brush. Þ To clean the front wheel, remove the screws and remove the wheel, and clean it with the brush.
Robot Cleaner $MFBOJOH UIF %VTU *OMFU Remove the dust inlet cover. Remove the main brush. Clean the removed main brush with the cleaning brush. Replace the dust inlet cover. (Insert the protruding part of the cover first and then press the other end part of the cover to fix the fixing pin.) 38 Downloaded from www.Manualslib.com manuals search engine Check the groove’s shape and insert the main brush into the fixing hole, and then secure the wing of the fixing pin to the fixing pin.
Maintenance 6TJOH BOE .BOBHJOH UIF #BUUFSZ The battery is a consumable item. The more you use the battery, the shorter the battery’s lifetime. #BUUFSZ MJGFUJNF We guarantee 6 months of use in a normal environment. Þ Always charge the battery for the best use experience. Þ The battery lifetime may vary depending on the use environment. Þ $IBSHJOH CBUUFSZ If you are using the robot cleaner for the first time, please fully charge the battery first.
Robot Cleaner Turn the power switch off. Remove four screws and remove the battery cover. Disconnect the battery cable connector and remove the battery. (Press and hold the lock clip to disconnect the battery cable connector.) Install the new battery and connect the battery cable connector. 40 Downloaded from www.Manualslib.com manuals search engine Replace the battery cover and tighten with four screws.
Maintenance 5P FYUFOE CBUUFSZ MJGF If you don’t intend to use the robot cleaner for an extended period of time, turn off the power switch after charging the battery fully. Þ Clean the dust inlet, dust bin, main brush, and side brushes frequently. If you use the robot cleaner with the dust bin full, the rotation of the internal motor will be increased, which may shorten the battery lifetime. Þ Always use the robot cleaner after charging.
Robot Cleaner 7PJDF (VJEBODF Following voices are the basic voice list. Depending on your model, some contents of thesevoices may differ from the actual voices. 7PJDF (VJEBODF Starting automatic cleaning. The robot cleaner will start auto cleaning. Starting CORNER Cleaning. The robot cleaner will start corner cleaning. Starting intensive cleaning. The robot cleaner will start intensive cleaning. Starting pre-set cleaning The robot cleaner will start the scheduled cleaning. Starting Shadow Cleaning.
Maintenance &SSPS .
Robot Cleaner ROOM Cause You operated the robot cleaner without the dust bin. Voice Dust bin is missing. Solution ROOM Cause Both main wheels have been lifted. Voice Please place the cleaner on the floor. Solution ROOM Escape rough road mode continually occurred in excess of the limit while moving. Voice Please check the front wheel. Bumper crash continually occurred in excess of the limit while moving. Voice Please check the bumper.
Customer Support & Specifications 5SPVCMFTIPPUJOH 1SPCMFN 4PMVUJPO The robot cleaner does not work. ̞ Turn off the power switch on the lower-rear side. ̟ Check the battery. Charge the battery in the charger. The robot cleaner does not charge. ̞ Remove any obstacles around the charger. ̟ Check if the power cord is connected to the charger. ̠ Turn on the power switch at the rear of the charger. è If you charge the robot cleaner forcedly, it may not be charged. The remote control does not work.
Robot Cleaner Specifications Robot cleaner Model MR6800M Dimensions 348mm (Diameter) x 86mm (Height) Weight 2.674kg Speed Cleaning mode: 32 cm/sec., Driving mode: 30 cm/sec. Operating noise - Max. 68dB (1400mAh battery) - Max. 70dB (2800mAh battery) Power consumption - Max. 20W (1400mAh battery) - Max. 25W (2800mAh battery) Battery Lithium iron phosphate (LiFePO4) 12.8V DC Dust bin capacity 600ml Charging time - About 60 minutes (1400mAh battery) - Max.
Customer Support & Specifications 3FNPUF DPOUSPM Model MRC6500 Dimensions 139mm (W) x 22mm (H) x 50mm (D) Weight 66g Battery AAA Size x2 Signal Transmission Distance(IR) 5m 47 Downloaded from www.Manualslib.
Product Warranty The warranty service we provide to our consumers is based on the customer compensation regulation. If you request warranty service, MONEUAL will provide the service. The company will notify the customer of whether he or she will be compensated and the details of the compensation within seven (7) business days after the day of the customer’s request, and offer the compensation within fourteen (14) business days after the day of notification.
Downloaded from www.Manualslib.
$VTUPNFS 4FSWJDF info@moneual.eu Before you call for service, please be ready to provide the following information: ˍGModel name ˍGA description of your problem ˍGPhone no. & address www.moneual.com www.moneual.eu Downloaded from www.Manualslib.
