User Manual

3 Assembly

Figure 3.29

BoltedSeatClampwithPivotalSeat(oponal)

❶ Using a 5 mm Allen wrench, loosen the seat clamp bolt and

insert the seat post into the seat tube. Figure 3.29

❷ Adjust the seat height up or down unl the rider feels they

have control of the bicycle and are comfortable.

Important! Be sure the minimum inseron marks do not go

past the top of the seat clamp and are not visible. See

Secon 1, Fig. 1.2: Seat Height and Handlebar Reach.

❸ Tighten the seat clamp bolt to lock the seat in place.

❹ Remove the cover on top of the seat.

❺ Using a 6 mm Allen wrench loosen the seat bolt unl the

seat moves freely.

❻ Adjust the angle of the seat unl the rider feels comfortable

and is sll able to control the bicycle.

❼ Tighten the seat bolt and lock the seat in place. Replace the

cover on the seat.

❽ Check the seat to be sure it does not move.

Remove cover