Instruction Manual

MicroShockDetector plus
- 23 -
Figure 10: Display of the system events of a MONILOG
®
MicroShockDetector plus
4 . 3 . 4 A c q u i s i t i o n p e r i o d s
The acquisition periods offer an overview on the individual configuration time segments of the
MONILOG
®
MicroShockDetector plus. In this way, it can be traced back how the device was
configured at the respective period of time.
Figure 11: Table with acquisition periods
The start and end time, the active time period and the reason which has led to the completion of
the acquisition period are shown. Moreover, all set thresholds and event channels for the period
are recorded. A new acquisition period begins, when the device had been switched off or
configured.
4 . 3 . 5 S y n c h r o n o u s d a t a
Synchronous data are measured values that are continuously recorded synchronously at a fixed
interval. The data sets are shown consecutively in a table (see Figure 12). In the program tab
“Climate graph”, the synchronous data are shown graphically. The legend on the right-hand side
of the diagram shows the measured values at the cursor position. By activating or deactivating the
“check mark” in the legend on the right-hand side, the diagrams for such parameters as
temperature, humidity, air pressure and light can be switched on or off (see Figure 13). The active
alarm thresholds can be displayed with the “Show thresholds” button.