Manual

A-10
Positioner SIPART PS2/SIPART PS2 PA
C79000-G7476-C150–01
112 22 0x139 OUT_CHANNEL Assignment to the transducer block
(positioning)
unsigned16 1 r, w
113 23 30 FSAVE_TIME Response time after communication failure float 1 r, w
114 24 0 FSAVE_TYPE Type of response to communication failure unsigned8 1 r, w
115 25 0 FSAVE_VALUE Setpoint on communication failure float 1 r, w
117 27 RCAS_OUT Readback in Remote Cascade mode ds33 1 x r
1 0 Value
2 0x4f Status
121 31 POS_D Position of the valve actuator ds34 1 x r
1 0 Value
2 0x4f Status
122 32 SETP_DEVIATION System deviation in % float 1 r
123 33 0x000000 CHECK_BACK Device information octet_string 3 x r
124 34 0x9FFF03 CHECK_BACK_MASK Mask for device information octet_string 3 r
125 35 SIMULATE Simulation of the readback ds50 1 r, w
1 0x4b Simulate_Status
2 0 Simulate_Value
3 0 Simulate_En / Disable
126 36 0 INCREASE_CLOSE Positioning direction unsigned8 1 r, w
127 37 OUT Setpoint in per cent, with ref. to OUT_SCALE ds33 1 r
1 0 Value
2 0x4f Status
128 38 OUT_SCALE Scaling of the output value ds36 1 r, w
1 100 EU at 100%
2 0 EU at 0%
3 1342 Units Index
4 0 Decimal Point
150 60 VIEW_1 void 6 r
1 1 ST_REV
2 6 MODE_BLK
3 7 ALARM_SUM
4 12 READBACK
5 31 POS_D
6 33 CHECK_BACK
Transducer Block
1 151 0 BLOCK_OBJECT Block characteristic ds32 1 r
1 0x0 Reserved
2 0x03 Block Object Block type (transducer)
3 0x05 Parent Class
4 0x02 Class
5 0x00000000 DD–Reference (reserved)
6 0 DD–Revision (reserved)
7 0x4002 Profile PA profile number assigned by PNO
for PROFIBUS – PA = 64
8 0x0300 Profile Revision
9 0x00 Execution Time for future use
10 0x0065 Number of Parameters
11 0x0064 Index of VIEW 1
12 0x00 Number of View Lists
152 1 0 ST_REV Counter that is incremented on every
change of configuration parameters
unsigned16 1 r
153 2 TAG_DESC Unique tag in the system that
the user can specify
visible_string 32 r, w
154 3 0 STRATEGY Strategy unsigned16 1 r, w