Operation Manual

Unpacking

A feature of both the Radius

subwoofers is the exposed drive unit. Great care must be

exercised at all times to ensure it is not damaged during unpacking and when ﬁnally sited in the

room. Any physical damaged caused to the drive unit by not complying with this requirement

will not be covered by warranty.

The feet are attached to your product ready to use. The mains power cord is contained separately in the

packaging and should be removed prior to unpacking the product.

To remove the product from its carton place some protective material on the ﬂoor and having removed any

other loose items (mains lead) from the top of the packaging, carefully invert the carton. Also see the icons on

the carton. Gradually pull the carton upwards to expose the subwoofer, which will be presented with its base

uppermost. Remove ﬁxing tape from plastic bag and expose the base/cabinet. The feet are factory ﬁtted to your

product to allow for swift installation and enjoyment of you new purchase.

Amp Panel & Controls for R360

Radius

10a