User manual

PRODUCT SET UP
Where to Position Your AirStream10
It is important that you consider carefully in advance where your AirStream 10 will be
situated and make sure that it is:
On a flat and stable surface.•
Within 1.8 metres of a power socket.•
Within a strong wireless network reception area. •
If you are not using the wireless connection, you must be near, or have access •
to a Ethernet point.
Where the telescopic aerial can be fully extended when listening to DAB or FM •
stations.
Away from bright sunlight or heat sources, such as a radiator.•
Away from humid or very damp places such as a bathroom.•
Switching on and Connecting to Your Network.
(Also see the Quick Start Guide.)
Connect the mains power lead into the socket on the bottom right hand side 1.
of the AirStream10 (see the image on page 3) and plug the power adaptor into
the mains power wall socket and switch on. If using an ethernet network lead
(supplied), also connect it at this stage.
‘DESIGN FOR SOUND, STARTING ...’ will be displayed followed by an un-set 2.
time and date.
Press the ‘Stand By’ button (see the image on page 3). The main menu will be 3.
displayed (if it is not displayed, press the menu button):
Turn the ‘Tune/ Select Dial’ to highlight and select ‘System Settings’4. . This will
display the ‘System Settings’ menu:
Press the ‘Tune/Select Dial’ to select ‘Network’ which in turn bringing up the 5.
‘Network settings’ menu. Press the ‘Tune/Select Dial’ again to select and start
the ‘Internet Wizard’. The wizard will automatically scan for available Wi-Fi and
Wired networks displaying a list of those that are available.
Turn the ‘Tune/Select Dial’ to your chosen network and press it to select. If 6. using
the wired connection method, select ‘[WIRED]’ from the list (please go to step
8). If the network does not have any security, ‘Please wait connecting’, and then
‘Connected’ will be displayed.
If your network does have security, the wizard will prompt you to enter the relevant 7.
Wired Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA) code or pass
phrase. This is accomplished by turning the ‘Tune/ Select Dial’ to highlight the
appropriate character, then pressing it to select. When the key has been entered,
turn the dial to highlight ‘OK’ and press it to select.
monitoraudio.co.uk
5
1
2
3
4
Main Menu
Internet AirStream 10
Music player
DAB
FM
AUX in
System settings
Network >
Time/ Date >
Language >
LCD Standby-Backlight >
Factory reset
1
2
3
4
00:00
00/00/0000
1
2
3
4
DESIGN FOR
SOUND
STARTING
1
2
3
4
Network settings
Please wait.
Connecting...
1
2
3
4
Network settings
Connected
R
1
2
3
4