User manual

4. A prompt will appear on the screen of the iOS-device. This
is just asking if you want to allow the device to share the
security data with the S300. Press “Allow”.
5. The blue LED will then start to ash again as per Pattern 2
and turn solid blue when connected to the Wi-Fi network.
6. When the LED is solid blue, remove the USB lead from the
device and the S300. You are now able to start playing music
via AirPlay.
You will not be able to play music wirelessly via AirPlay with
the USB lead still connecting the iOS Device and the S300.
7. Refer to page 12 for instruction on playing music via AirPlay.
Option 2.
Using this method of connection you need either a wireless
enabled PC/ Mac or an iPod Touch, iPhone or iPad running iOS5
or later.
This method of connectivity involves manually entering the
wireless network name (SSID) and security information (WEP
Key) into the S300’s web portal from either the computer or iOS-
device via a temporary wireless network.
Via iOS-Device
1. Turn the S300 on from standby mode. The LED on the front
will ash blue, rstly in pattern 2 then pattern 1 sequence.
If the LED is Purple (Airstream Direct mode), press the AirPlay
Button (Item 5 on Page 3) on the rear of the S300 to put it into
AirPlay mode and allow the S300 to start searching for Wi-Fi
networks.
2. When it changes to Pattern 1, it is searching for a wireless
network. Press and hold the Airstream Connect/ Airstream
Direct Button (Item 5 on Page 3) until the LED on the front
ashes white (Pattern 3). This will take approximately 12
seconds.
3. On the device, go to Settings, then Wi-Fi.
7
Make a note of the name of the wireless network
(SSID) that you are connecting to and also the security
information (WEP, WPA or WPA2) to ensure the seamless
connection of the S300 to the wireless network.
HINT
If you face problems connecting the S300 using this
method, try using the web portal via the PC/ Mac or the
iOS device.
HINT
monitoraudio.com
Model : airstream s300
IC : 5928A-MA191819
FCC ID : O7VMA191819