Specifications

Option 3, Web Browser

Using this method of connection you need either a

wireless enabled PC/ Mac or an iPod Touch, iPhone

or iPad running iOS5 or later.

This method of connectivity involves manually

entering the wireless network name (SSID) and

security information (WEP Key) into the ASB-2’s web

portal from either the computer or iOS-device via a

temporary wireless network.

Via iOS-Device

1. Turn the ASB-2 on from standby mode. The LED

on the front will ﬂash blue, ﬁrstly in pattern 2 then

pattern 1 sequence.

2. When it changes to Pattern 1, it is searching for

a wireless network. Press and hold the Wi-Fi/

Airstream Connect button (Item 5, Buttons, page

4) for 5 seconds. The LED will start to ﬂash blue,

pattern 3.

3. On the iOS device, go to Settings, then Wi-Fi.

4. In the list of available networks you will see ASB-2_

Setup_0... (Where the 0... will be the last six digits

of the products unique MAC address). Select this.

When it has been ticked, press the home button.

5. Here, you have two options, you can scan the

QR code (below) if you have a QR reader on

your device. Alternatively, select Safari and in the

address bar at the top, enter 192.168.1.12

6. The ASB-2’s portal page will now be displayed.

Select Wi-Fi Setup from the list on the left hand

side.

Make a note of the name of the wireless

network (SSID) that you are connecting

to and also the security information (WEP,

WPA or WPA2) to ensure the seamless

connection of the ASB-2 to the wireless

network.

HINT

If you face problems connecting the ASB-2

using this method, try using the web portal

via the PC/ Mac or the iOS device.

HINT

If the IP address 192.168.1.12 doesn’t work,

turn off the ASB-2 and press the home button

on the device and then retry from Step 1.

HINT