Specifications

14
5. Click on ASB-2_Setup_*****, and then the Connect
button. After a few seconds, you will be connected
to the Airstream Connect wireless network.
Continue to step 7.
6. On a Mac, click on the wireless network signal
strength indicator located in the bar at the top of
the desktop.
Continue to Step 7 below.
7. On the computer, open your web browser and in
the address bar at the top of the page, type in
the following address to load the Airstream web
portal: 192.168.1.12
8. Click on Wi-Fi Setup on the left hand side of the
page. On this page, you will see the details of the
ASB-2 and the “Profile” of the wireless network
you are about to connect to.
9. Click the drop down arrow to select the “Service
Set ID” (SSID). In the list should be your wireless
network. Select your network and enter the WEP
Key (or other security type).
10. Click Apply. When you do, a warning pop up will
be displayed, click OK.
If Airstream Connect isn’t displayed, click
the refresh arrows (top right corner of the
window).
HINT
With both Windows and Mac OS’s, if
AirstreamConnect isn’t displayed, come out
of the selection window and then try again
after a few seconds.
HINT