Specifications

15
Windows pop up:
Mac pop up:
11. After clicking the OK button on the pop up, there
will be no other visible indication on your browser
that the ASB-2 is connected to the network.
The LED will then start to flash blue and green
alternately (Pattern 2) and then change to the
previous input mode once it has been connected.
This will be indicated by the LED.
12. Remember to return to the Available Wireless
Networks list on your computer and reselect your
home Wireless Network.
13. To start streaming to the ASB-2 from your PC,
Mac or iOS device, please refer to page 19.
On Screen Menu
To access the On Screen Display (OSD), press the
Menu button (Item 6, Remote, page 4). A single press
of the Menu button will bring up the menu, illustrated
below:
To navigate through the menu use the up, down, left
and right arrows. Use the up and down arrows to
move up and down the different options and then
the right arrow to select that option. Press ok on the
option you wish to select and then use the left arrow
to move back to the main menu.
Language Selection
Firstly, we would recommend selecting the OSD
Language. To do this, navigate down to OSD
Language and press the right arrow on the remote.
Highlight the appropriate language from those listed
and press OK to select.
If it still flashes blue slowly after repeating
the above steps, try moving the ASB-2
closer to the router.
The TV needs to be on the HDMI input
connected to the HDMI output on the ASB-
2 to see the OSD.
HINT
If the LED flashes blue slowly (pattern 1),
then it has failed to connect. You will have
to repeat the above steps to try again.
HINTS
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
ENGLISH
华语
NEDERLANDS
FRANÇAIS
DEUTSCH
ITALIANO
日本語
PORTUGUÊS
РУССКИЙ
ESPAÑOL