Specifications

Auto On / Off
Auto On / Off enables the ASB-2 to be turned on and
off by the TV it is connected to. The TV will need to
have its version of HDMI Power Control enabled for
this to work.
Front LED Brightness
The intensity of the main LED can be adjusted if it is
too bright for your requirements.
There are three settings, bright (default), dim and off.
Dim will set it to 50% intensity.
If set to off, the only feedback will be via the button
LED’s and the On Screen Display.
Firmware Update
Here, you can see what version of firmware the ASB-2
is currently running and check to see if an update is
available, although the ASB-2 will automatically check
for an update every time it is connected to the internet.
You may be asked for the firmware version should
you contact Monitor Audio for any technical or set up
advice.
To check to see if the firmware is up to date, use the
arrow buttons on the remote to navigate to ‘Check for
Update’ and press the right arrow.
It will then check and inform you that either it is up
to date, or that there is an update available. If there
is an update available, it will go through the update
procedure on page 22.
Factory Reset
This resets all of the customisable settings within the
menu structure of the ASB-2 back to their original,
factory settings.
18
BRIGHT
DIM
OFF
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
BRIGHT
DIM
OFF
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
UPDATE AVAILABLE.
PRESS ‘OK’ TO PROCEED
UPDATE IN PROGRESS.
PLEASE WAIT
FIRMWARE UP TO DATE
CURRENT VERSION
CHECK FOR UPDATE
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
UPDATE AVAILABLE.
PRESS ‘OK’ TO PROCEED
FIRMWARE UP TO DATE
CURRENT VERSION
CHECK FOR UPDATE
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
v#.##
CURRENT VERSION
CHECK FOR UPDATE
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
v#.##CURRENT VERSION
CHECK FOR UPDATE
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
The Firmware will remain as the most recent
version.
HINTS
The Wi-Fi settings will have to be re-entered.
Refer to page 10
ON
OFF
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS
ON
OFF
INPUT SELECT
EQUALISATION
OSD LANGUAGE
FIRMWARE UPDATE
CHANNEL LEVELS
SUB OUT
POWER OPTIONS
FACTORY RESET
3D AUDIO
AUTO OFF TIME
HDMI PASS THROUGH
AUTO ON / OFF
FRONT LED BRIGHTNESS