User manual

Configuring the AM700
AM700 Audio Measurement Set User Manual
3-15
When the Copy Format is either PostScript or TIFF, the Copy Style can be set to
Color. When using monochrome PostScript printing, the black and white areas are
color inverted to reduce the toner use for laser printers.
Copy Destination. Printouts are spooled to the currently selected printer port. The
following printer port choices are selectable:
H GPIB
H COM 0 or COM 1 (RS-232)
H File on floppy disk
H File in internal nonvolatile file system
H None (This choice disables hard copy output.)
When the Copy Destination is set to File, the Output File selection is active. This
choice brings up a file browser, shown in Figure 3-11. The file browser lets you
select or name the output file name for the hard copy. You can name a file by
touching the Filename soft key. This displays a keyboard to type in the new file
name. Enter a new file name and press SELECT to designate that name as the file
name to copy to. Hard copy files can be sent directly to the floppy disk for later
printing. A limited number of screen dumps can be stored in NVRAM for later
transfer to a floppy disk. The available memory in the internal NVRAM of the
AM700 depends on how much of the memory is used for other user files.