User manual

Configuring the AM700
3-16
AM700 Audio Measurement Set User Manual
Figure 3-11: Hard copy output file selector
Copy Styles. You can select the choice of color output for PostScript and TIFF
formatted files. When set to Color, printer output will be color formatted. If you
select a copy format other than PostScript or TIFF, the Color state is ignored, and
the file is output as monochrome (gray scale) only.
Use the Communicate Configuration menu, shown in Figure 3-12, to define the
serial communication parameters for serial port 1, serial port 2, and the GPIB port.
GPIB choices permit you to select the mode of operation and the GPIB address of
the AM700. GPIB modes of operation are Talk/Listen, Hardcopy, and Off Bus.
Talk/Listen mode is used for remote control of the AM700 through the GPIB port.
Hardcopy is the talk-only mode and is used to output screens and data to a GPIB
printer. Off Bus turns off the GPIB interface, and the AM700 will not communicate
with any other device on the bus.
System
Communica-
tion Menu