User manual

Audio Generator
4-34
AM700 Audio Measurement Set User Manual
Changing Display Measurement Units in the Status Panel
If you want to change display units (for example, to change the displayed frequency
units from Hz to kHz or the voltage units from dBu to V) you must first select the
editor for the value to be changed by touching it. With the value selected, press the
Units front-panel button to display the Units pop-up menu (seen in Figure 4-13).
Turn the knob to select the desired units and press the Select key to accept the
change. You can also select units by making a direct selection with a press of the
appropriate units key (in the column under the Units button) and by repeatedly
pressing the Units button to rotate through the choices (with or without the Units
pop-up menu being displayed). When the unit is set to what you want, press the
Select key to accept the choice and deselect the editor. The associated number
changes appropriately for the unit selection.
Figure 4-13: Units menu with choice for voltage units shown