User manual

Audio Analyzer
4-44
AM700 Audio Measurement Set User Manual
Figure 4-18: View Setup for Regulation mode measurements
Touch the Start Regulation soft key to begin the measurement plot. If you want to
stop the measurement before the plot has completed, touch the Stop Regulation soft
key. If more than one view is displaying a Regulation mode measurement, as in the
example shown in Figure 4-19, touch the view window you want to run Regulation
mode in before touching the Start Regulation soft key. Regulation is started in the
active view window only. If you have set up separate generators for use, for example
A Analog is running on measurement 1 and B Analog is running on measurement 2,
you can immediately touch the second view window and touch Start Regulation to
commence that measurement as well. Both will run concurrently.